Grain semi-trailer 914281 46-60 m3 with a remote axle

• Frame of two I - section spars 09Г2C (Russia) / Domex 500 (Sweden) / Strenx 700 (Sweden) * * * connected by reinforced cross beams (for difficult road conditions);
• The supporting device is two - speed with manual one - way drive BPW (Germany) / SAF (Germany) / JOST (Germany) / OMS (Turkey) * * * with a loading capacity of 24 t;
• Kingpin JOST (Germany) 2 - inch in accordance with UNECE Regulation No. 55.00, located in accordance with ISO 1726;
• 2 chocks Lokhen (Italy) ;
• Spare wheel holder Takler (Italy);
• Takler lateral underrun protection (Italy) (UNECE compliance No. 73.00);
• Plastic wings Domar (Italy) above each wheel, a pair of mudguards behind the rear and front axle;
• Lokhen wash basin (Italy ), with a soap dish;
• Toolbox Daken (Italy) , with a key locking mechanism;
• Marking with improved retro - reflective characteristics according to UNECE Regulation No. 48.03;
• Attachment brackets on the frame are galvanized * * * ;
• Takler aluminum rear bumper (Italy), with integrated license plate mount and lights, made in accordance with UNECE Regulation No. 58.01;

• 4x9000 kg SAF INTRA CD (Germany);
• Air suspension SAF (Germany) with hydraulic telescopic shock absorbers;
• Drum brakes;

• Wheels GOODYEAR (Germany) assembled - 9 pcs (including 1 spare tire);
• Tires 385/65 R22.5;
• Steel wheels Jantsa / AKO / Hartung * * * 11.75 x 22.5;

• Pneumatic electronic brake system WABCO (Germany);
• WABCO OptiLink semi - trailer parameters control system (Germany) - indication of axial loads, axle raising and lowering control, warning about dangerous roll and on - board diagnostics;
• Membrane - type brake chambers;
• The drive of a parking brake from energy accumulators on three axes;
• Semi - automatic parking brake system with spring energy accumulators;
• ABS socket according to ISO 7638;

• Electrical equipment of Aspoeck brand (Austria) ;
• ABS socket;
• Two combined rear lights that act as parking lights, direction indicators, braking signals, fog lights, reversing lights and lighting of the state registration plate;
• Two full size lights on a flexible basis;
• Additional LED reversing lights;
• Two front position lamps combined with retroreflectors;
• Eight side marker lights with orange reflectors;
• Two rear reflectors of red color of a triangular shape, are part of the rear combined lamps;

• The body is made of reinforced profiled steel;
• The canopy service platform with a handrail, folding stairs and aluminum flooring Stabil (Poland) ;
• Boards Fuhrmann (Germany) / 09G2S (Russia) * * * with a profile thickness of 2 mm;
• The thickness of the flooring - 2.5 mm / 3 mm * * * ;
• The lower sides on the upper link with accessories Suer (Germany) * * * ;
• Rubber pad between the lower and upper side, to protect the hinges of the side from precipitation;
• Cross arches of a canopy located on racks;
• Canopy with winder made of aluminum profile;
• Staircase on the rear side, to service the canopy;
• Ladder inside the body in front of the semi - trailer;
• Ties inside the body of the pipe, to increase the rigidity of the body;
• Rubber seals around the perimeter of the sides, to prevent spillage of cargo;
• Aluminum ladder with fastening under the body, on quick - detachable brackets;

1. Pre - treatment of the surface of the semitrailer in the inhabited shot blasting chamber increases the coefficient of adhesion of the coating, its quality and durability.

2. Painting with epoxy zinc - based primer

3. Staining with two - component European - made enamel (90 - 250 microns)