Dla of semi-automatic folding and pasting of a cut of standard sizes four a valvate gofroyashchik of wide range on the lateral valve with formation of packs. Putting glue is made by an automatic glue head. It allows not to allow its hits in packing after a faltsevaniye as the beginning and the end of a glue path happens to a space from edge of the glue valve.
Working process:
Preparations are laid in foot on a loading table of the operator.
The operator serially takes the top preparation, puts the right part and slightly left part and sends to a working zone.
Further the machine works completely automatically.
Preparation takes place under a head for putting glue and there the glue path which length is established previously by means of infrared sensors is put. The left guide bends preparations at their movement.
The ridge conveyor transports packing through clamping shaft in the store for foot. The infrared sensor considers the number of pieces.
Feet keep behind an emphasis, and are in front leveled in a form by a blooming podbivatel. From above foot is pressed by freight.
When in foot the set quantity collects, an emphasis falls and releases foot of boxes.
Foot is transported on a table behind the car for the subsequent binding.
The infrared sensor distinguishes leaving of foot and an emphasis again come to the provision of reception.
The operator continuously gives to the preparation car. The giving table at the same time automatically rises by working height.
If the programmed number of packings is reached, 3 seconds sound a signal of the termination of a cycle.
Types of processing and production:
Gofroyashchiki from 3 and 5 layer corrugated cardboards.
The amount of cutting of the stuck together boxes, mm
length: … … … … … … … … … … … .max 2650min 350
height: … … … … … … …. … … …. max 1100min 250
Features of application:
Due to big flexibility in change-over when changing a standard size of a gofroyashchik it is often more economic to have several semiautomatic devices instead of the high-speed automatic transfer line demanding big time for readjustment. By the way, existence of different types of cars only improves work of all enterprise in general. Very often our clients begin work with a semiautomatic device, getting then and the automatic machine. But our machine never remains without work. Cases when the enterprises clients buy the second car after some operating time on one are not rare.