- Weight1 kg
TRS 2002 scope
TRS 2002 glue is intended for cold curing fabric-fabric, rubber-rubber, rubber-metal or fabric-metal.
Main scope of TRS 2002
Pasting of conveyer belts, repair of conveyer belts by means of repair patches and strips.
Pasting of the conveyer belt (short instruction)
Smooth out a round brush a fabric surface of a tape. Remove dust with a manual brush. Apply mix of TRS 2002 glue and a hardener on the smoothed-out surface 1000 M. Leave to dry not less than 45 minutes. Leave the second layer to dry until it does not reach poorly sticking state (drying time about 15-30 minutes). Apply the connected surfaces to each other and a prikatayta a bilateral roller. It is possible to use the heavy rubber hammer also. The conveyer belt can be operated not earlier than in 3 hours ***
*** Proceeding from our experience, it is desirable to bring the conveyer belt into operation not earlier than in 24 hours after pasting.
Expiration date: 2 years
Viability: 1-2 hours
Temperature firmness: max. 80 °C (at short-term influence)
Color: dark gray
Ratio of the mixed parts: 40 g of a hardener of 1000 M on 1 kg of glue
TRS 2002 glue: 1 kg of bank (10 cans in a box)
Hardener 1000 M: 40 g a bottle (10 bottles in a box)
Poizvoditel: TRS International, Germany
Do not work with TRS 2002 glue at temperatures below +10 °C. If TRS 2002 glue was stored at adverse temperatures, then in 24 hours prior to its use place it in the room where repair work will be performed.
Always carefully mix TRS 2002 glue and a hardener 1000 M. It will allow to receive the uniform mix containing a considerable firm component from oxides of the metals accumulating at the bottom of cans.
Never operate installations earlier, than in 3 hours after completion of process of curing. The more time it will be sustained, the pasting indicators will be better.
Never use solvents for cleaning of a surface after its sherokhovaniye. Clear surfaces only a manual brush, do not use compressed air.