Gidrofobiziruyushchy (water-repellent) impregnation of PRG 02

Impregnation "the Mountain Crystal PRG 02" is a special gidrofobiziruyushchy liquid which gives water-repellent effect to the processed bases. And also strengthens porous mineral surfaces and connects free particles in it. Impregnation after application forms a strong and at the same time thin covering which is urged to prevent penetration of moisture into thickness of mineral material, and the salts which are also dissolved in it.

Gidrofobizator is easy in application, nonflammable and safe.

The processed basis is reliably protected from various washing substances, engine oils, gasoline, transmission oils, organic solvents, deicing reagents and other chemicals. Surfaces after application on them water-repellent impregnation wash easier and cleared of various pollution.

Impregnation is water dispersion of special polymeric smolichty connections, with addition of a complex of active modifiers and additives.

Typical application of a gidrofobizator

Impregnation "the Mountain Crystal PRG 02" with success is used in the extensive range of commercial and household areas, including in the industry, agriculture, and also in the private sector. Including for floors, and for walls. For example material in processing of fences, walls of buildings, balconies, concrete bridges and bridge designs, elements of buildings, constructions, parking, parkings and car washes, tunnels, overpasses, industrial floors, warehouse, shops, etc. is often used.

Gidrofobiziruyushchy liquid "Mountain Crystal PRG 02" after drawing on a surface, quite successfully fights against formation of vysol, increases wear resistance and frost resistance of concrete. The structure can also be applied to preparation for the subsequent processing by various construction materials, for example for painting. It is possible to use and inside, and outside of the room.

Technical characteristics of a pripitka

Basis - Water dispersions of polymeric pitches and modifiers

The principle of action - Gidrofobization

Expense: 250-330 ml/sq.m depending on porosity of the basis

The dry rest - 12%

Density - 1,1 g/cm3

Temperature restrictions - from - 30o to +40o With

Packing - the Plastic volume of 30 l, 20 l, 10 l and 5 l