Formatno-raskroyechny Kord 4532TA machine
It is intended for sawing up of timber from the massif of wood (longitudinal, cross, at an angle), and also chipboard, DVP, plywood and other sheet materials revetted with a laminate, an interline interval, plastic with preliminary undercutting of the lower edge of preparation for an exception of formation of chips.
The machine of the class "PREMIUM", is created on technologies of the best European producers!
The basic equipment of the machine switched already on the big, easy leaning-back protection cover of saws and a 2-section pneumobeam, carriage width is increased.
This model of the machine is intended for severe conditions of work in 2-3 changes, calculated under big loadings
|Sizes of the main desktop (carriage), mm||3200х375|
|Length spent on drink, the greatest, mm||3200|
|Distance between a saw and a side basic ruler, the greatest, mm||1250|
|Tilt angle of saw knot, hail.||0-45|
|Height spent on drink (the main saw of 300 mm), mm||85|
|Height spent on drink at an angle the 45th hail. (main saw of 300 mm), mm||55|
|Diameter of the main saw, mm||300 (400)|
|Landing diameter of the main saw, mm||30|
|Engine capacity of the main saw, kW||5,5|
|Frequency of rotation of the main saw, rpm||4000/6000|
|Diameter of a cutting saw, mm||120|
|Landing diameter of a cutting saw, mm||20|
|Engine capacity of a cutting saw, mm||1,1|
|Frequency of rotation of a cutting saw, rpm||8000|
|Working tension, In||380|
|Mass of the machine unpacked, kg||850|
|Overall dimensions of the machine (DKHSHKHV), mm||3200х2450х900|