- Country of manufactureRussia
Release agent based on a composition of mineral oils, additives with active separation properties and anti - corrosion additives. When oil is applied, a chemical - physical separation layer is formed between the formwork and the concrete, preventing the concrete from sticking to the formwork. Differs in increased resistance to high temperatures.
analogue of Polyplast forms type 3.
Recommendations for use
BETONIT Classic 100 concrete mold and formwork grease is used as delivered.
BETONIT Classic 200 can be used for all common types of formwork in concrete plants and in construction, as well as for non - absorbent formwork (Bakelite formwork) and for plastic formwork.
BETONIT Classic 200 prevents direct contact of the formwork with the concrete surface. In this way damage to the concrete surface can be avoided. Thanks to this, the life of the formwork will be extended and the profitability of production will be increased. In addition, the product is safe for the environment.
BETONIT Classic 200 does not affect the subsequent treatment of concrete surfaces (plastering, tiling, wallpapering, painting, etc. ).
- Easy separation of the product from the mold
- Faster stripping and mold cleaning
- Longer formwork service life
- Suitable for all types of concrete
- Improves corrosion protection of steel molds
- Does not contain solvents
- Does not discolor the concrete surface
- Economical to use
For best results, it is recommended to use the OKTAMIX range of greases, cutting fluids, cleaners and anti - corrosion products. Additional information can be obtained on the website www. oktamix. ru or from the representatives of ZSM OKTAMIX LLC in your region.
The product should be stored in a closed container in a dry and clean environment, away from flammable materials, heat sources and direct sunlight. Recommended storage temperature 5 - 35 ° C. Avoid deep freezing of the product. The guaranteed shelf life is 12 months.
|Index||Unit rev.||Typical value|
|Appearance||Visually||Liquid from yellow to brown|
|Density at 20 ° C, kg / m³||g / cm3||0.85 . . . 0.90|
|Flash point||° C||> 180|
|Acid number||mg KOH / g|
|Kinematic viscosity at 40 ° C||cSt||16 . . . 45|
|Operating temperature||° C||- 10 . . . + 80|
The values of the given physical and chemical indicators are typical for the currently manufactured products. In the future, they can be changed in accordance with the requirements of the specifications.