FMO-60 ferro-molybdenum at the best price
- 15.2 EUR/kg. - from 100 kg.
- Cash,
- Invoice payment,
- Visa/Mastercard,
- Cash on delivery,
- MoneyGram,
- Safe shopping UaPay,
- D/A - Documents against acceptance,
- D/P - Documents against Payment,
- L/C - Letter of Credit,
- T/T - Telegraphic Transfer,
- Credit card,
- Western Union
- In detail
- Customer pickup,
- Courier
- In detail
- Country of manufactureUkraine
FMO - 60 ferro - molybdenum at the best price
Ferro - molybdenum - is ferroalloy. Its basic elements are a molybdenum (50 - 60% ) iron.
In metallurgy ferro - molybdenum is used for an alloying of steel, cast iron and various alloys, and the alloyed steel, in turn, contains from 0,1 to 0,3% of molybdenum.
At addition of molybdenum in composition of alloys, a prokalivayemost and hardenability of steel improves, thus properties of steel remain. Molybdenum increases viscosity of steel and liquidates holiday fragility of chromonickel steel. For increase in durability and increase in resistance to wear molybdenum is added to cast iron.
Ferro - molybdenum can be realized by pieces or in the form of the shattered, sifted particles.
Chemical composition
GOST4759 - 91 ferro - molybdenum
| Brands (state standard specifications) | Mass fraction, % | ||||||||||||
| Mo | W | Si | With | P | S | Cu | As | Sn | Sb | Pb | Zn | Bi | |
| not less | no more | ||||||||||||
| Fmo60 (Tax Code) | 60 | 0,3 | 0,5 | 0,05 | 0,05 | 0,10 | 0,5 | 0,02 | 0,01 | 0,01 | 0,01 | 0,01 | 0,01 |
| Fmo60 | 60 | 0,3 | 0,8 | 0,05 | 0,05 | 0,10 | 0,5 | 0,02 | 0,01 | 0,01 | 0,01 | 0,01 | 0,01 |
| Fmo58 (Tax Code) | 58 | 0,5 | 0,5 | 0,08 | 0,05 | 0,10 | 0,8 | 0,03 | 0,02 | 0,02 | 0,01 | 0,01 | 0,01 |
| Fmo58 | 58 | 0,5 | 1,0 | 0,08 | 0,05 | 0,12 | 0,8 | 0,03 | 0,02 | 0,02 | 0,01 | 0,01 | 0,01 |
| Fmo55 | 55 | 0,8 | 1,5 | 0,10 | 0,10 | 0,15 | 1,0 | - | 0,05 | 0,05 | - | - | - |
| Fmo50 | 50 | - | 3,0 | 0,50 | 0,10 | 0,50 | 2,0 | - | 0,10 | 0,10 | - | - | - |
Ferro - molybdenum is delivered in pieces or in the form of the shredded and sifted particles. Ranges of the sizes of particles and admissions have to correspond provided in the following table (the mass of a podreshetny product is established for point of supply of material to the buyer):
Fractional structure
| Fineness class | Size of pieces, mm | Maximum mass fraction of a product, % | |
| nadreshetny | podreshetny | ||
| 1 | " 2" 100 | 10 Any piece should not exceed more than by 1,5 times a limit of the established range of particles in two - three dimensions. |
3 |
| 2 | " 2" 50 | 3 | |
| 3 | " 2" 25 | 5 | |
| 4 | to 2 | - | |
Lump of nonmetallic inclusions (sand, slag and other pollution) should not exceed 0,5% of lump of party. Stickings and films of oxides are allowed.