Flexible floating pipeline TNFP

Flexible floating pipelines TNFP -To work with a flexible pipe floating ball joints are not required. -Term Services for hydroabrasive wear at the flexible pipe floating 5-8 times greater than that of steel pipe. Bending radius of flexible pipe floating TNFP is 8-12 diameter to 325 mm diameter is 4 m. When working with a flexible floating pipeline TNFP energy to move 1m3 of soil is reduced by 20-30%., Reduction of energy consumption occurs both by reducing pressure losses in length, and by reducing pressure losses on the local resistance which are the ball joints, overlapping 2/3 to open area of ​​the pipeline. -Work With flexible floating pipeline allows you to move the slurry with a concentration of up to 50% of the firm. -When Working with a steel pipe, ball joints allow you to work with a pressure of 1 MPa and a minimum agitation. Flexible conduit floating TNFP can operate with a pressure of 1 MPa (10 MPa) at significant wave loadings. Flexible pipes (TSP and TNFP) made several modifications. With soft cuffs at the ends of the pipes, with fixed rubber 0metallicheskimi flanges and with rotating steel flanges on rubber-fabric "piles." The latter two compounds do not require the use of any gasket. For electrical dredgers we offer our customers a special device that allows you to carry out cabling, perform the installation of signal lights. In one section of floating tubes TNFP need one device. The design of the floating pipeline TNFP protected by the application for the invention № 2007131035/03.