Technical characteristics
- Country of manufactureRussia
Description
Flashing beacon MP S 12 - 55 red
Flashing beacons are effectively used to mark special service vehicles and special equipment in traffic, as well as by road and construction services when performing work that requires marking.
- The hood is made of impact - resistant (unbreakable) transparent material - polycarbonate.
- The lighthouse has a H1 12 - 55 halogen lamp.
- The rotation of the reflector is provided by a gear train that can work reliably for 1000 hours without maintenance of the rubbing parts - the gear wheel.
- The lighthouse is fastened with three M6 bolts
- Works in conditions from - 40 to + 50 С
Supply voltage | 12 in |
Flash frequency, flash groups | 2 - 4 Hz |
Characteristic | Lighthouse C Flashing |
Light source | Halogen lamp AGK 12 - 55 (H1) |
Connection to the vehicle's on - board network | Two wires 200 mm. Positive lead is red wire, negative lead is black wire. |
Diffuser, cap color | Red |
Fastening | Mechanical, three bolts M6 |
Dimensions (edit) | Height 208 mm, base diameter 180.5 mm |
Weight | 0.75 kg |
Body color | Black |
Distinctive features | Rotation of the reflector by means of a gear drive. The cap is made of impact - resistant material - polycarbonate. |
Packing rate | 10 pieces |
Applicability | Designed to provide special light signals to a vehicle. Mounts on the roof of the car or on a pillar with a 360 * view. |
Guarantee | 18 months |
Certificate | The lighthouse was tested at the Research and Experimental Institute of Automotive Electronics and Electrical Equipment in Moscow for compliance with the UNECE Regulations. |
Degree of protection | IP55 in accordance with GOST14254 - 96 |
Contact the seller
Flashing beacon mp s 12-55 red