Film extruder
- Customer pickup,
- Courier
- In detail
- BrandХолод-К
- Country of manufactureRussia
Recyclable material | HDPE | LDPE |
The maximum width of the sleeve when folded, mm | 870 | |
Film thickness, microns | 10 - 30 | 20 - 100 |
The maximum diameter of the wound roll, mm | up to 500 | |
Maximum line productivity, kg / h | up to 50 | up to 70 |
Nominal screw diameter, mm | 45 | |
The ratio of the working length of the screw to its diameter | 1/33 | |
Number - in the zones of temperature regulation, pcs. including | 8 | |
on the screw sleeve | 4 | |
on the filter housing | 2 | |
on the forming trap and distributor | 2 | |
Air Consumption, 1m3 / h | 1 | |
Working pressure of compressed air, kg / cm2 | 6 | |
Motor gearboxes and their installed power, kW | ||
Main Drive Electric Motor | 15 | |
Extruder Head Electric Motor | 0.09 | |
Extractor motor | 0.75 | |
Winding device electric motor | 0.75x2 | |
Blower motor | 1,1 | |
Installed power of heating elements, kW | 24 | |
Installed power of the line, kW | 42 | |
Average power consumption of the line, kW | 20 | |
Overall dimensions, mm | ||
Width | 2300 | |
Length | 4400 | |
Height | 4100 | |
Weight. Kg | 2500 | |
Coolant Installation | ||
Cooling capacity, kW | 4 | |
Power consumption kW | 2,5 | |
Total power consumption of the installation + VLW, kW | 22.5 |
The production of plastic film is in demand in many sectors: food industry, agriculture, construction, packaging and others.
Your interest in high quality, reliability and durability of equipment has brought you here.
What is needed to produce high - quality film?
- Extruder
- Cutting machine;
- Others.
If you need equipment with high performance, pay attention to the presented extruder ER - 700M.
Why exactly this technique?
- The film produced on the equipment meets the requirements of GOST - 10354;
- The feedstock is low density and high density polyethylene;
- A possibility of release of polyethylene in the form of a cloth or a sleeve;
- Easy change in film thickness (0.02 mm - 0.14 mm) and others.
The production process is greatly simplified.
How is plastic film produced?
Granular polymer (with or without special additives) must be loaded into the hopper. From the hopper, the substance “takes” the feed screw. Passing through it, the granules gradually heat up and melt. The result is a melt of granular polymer. Then it will have to be brought to a homogeneous consistency.
It is subjected to an extrusion process, or molding by pressing through a molding head. As a result, the final product (film or sleeve) is obtained at the output.
How much does the equipment cost?
The cost of the ER - 700M is fully justified by its technical characteristics. Here are just a few of them:
- High level of productivity (this equipment is capable of working with a capacity of 45 kg / h);
- The presence of a private converter, which makes it possible to smoothly adjust the screw drive;
- The possibility of stepless regulation of the electric drive of the hood unit, heating unit, film acceptance and others.
The latest technology used to create the equipment allows you to get the perfect film. It will not have extra holes, cracks, tears, pressed folds and much more. By its properties, the manufactured products will 100% meet the requirements specified at the level of "GOST - 10354".
Why exactly Kropotkinsk plant MiSSP CJSC?
- More than 18 years of market experience. Since 2007, the company fully complies with the requirements of the standard ISO 9001: 2008 of international level;
- More than 15 production areas (manufacturing of molds, equipment for blowing PET bottles and others). The company is focused on the continuous increase in production volumes, the development of new areas;
- Industrial machines for the production of food film have all quality certificates and meet the high requirements of the law;
- Production using modern technologies of 3D - modeling. This allows you to think through structural solutions and ensure maximum efficiency of the equipment;
- The equipment is manufactured at the factory using modern materials (aluminum alloy D16T and V95T1). In the production process, other time - tested equipment is also involved. Our factory gives a quality guarantee on the product line.