Equipment for production of dry mixes

Modular installation of the MLH series for preparation of dry technological mixes.

Modular installations of the MLH series are complete universal lines of dry mixing made of high-quality imporny accessories, and allow to make both dry construction mixes, and specialized structures with simultaneous use to 19 components. Configuration of installations provides its free placement in the majority standard one-storeyed hangars and warehouses with ceiling height not less than 8 m.

If you have not a standard room - call! and our experts will be able to propose an individual technical solution!

All metalwork is made on own production, including of stainless steel!

Standard structure of the equipment for production of dry mixes:

1. Mixing knot, including the mixer for dry mixes with highly effective activators. Wide range of volume of mixing - from 50 to 10 000 liters.
2. The dosing knot which is standardly placed over mixers consists of batchers, system of aspiration, a frame. Can turn on up to 6 batchers of bulks of various volume and execution
3. Frame of mixing knot, including frame, bunker of ready mix, platform of service,
4. A filler warehouse, including a frame, to 4 bunkers, the platform of service
5. A silo for knitting, in quantity to 4 pieces
6. Rastarivateli MKR (Big-begov) in number of 2 pieces
7. Manual rastarivatel of bags
8. Packing knot, various execution - linear, vertical with shnekovy or pneumatic giving from mixing knot. A possibility of packaging of finished goods in valvate bags and μR
9. Operator with the technical room

IN INSTALLATION HIGH-QUALITY ACCESSORIES OF PRODUCTION ITALY AND GERMANY ARE USED THAT IN THE COMPLEX WITH THE RIGID BEARING FRAMES DOES PROCESS OF WORK SIMPLE, CONTINUOUS AND ECONOMIC IN OPERATION.

For achievement of high efficiency and profitability, installation has all necessary equipment for production of dry technological mixes:

• The mixer single-shaft with additional activators and with a geometrical volume of 50-10 000 l. (production Italy);
• High-precision batchers in quantity to 6 pieces and support of dispensing to 4 components in one batcher.
• High-performance feeders shnekovy with frequency regulation and two modes of giving in batchers. Wide scale of industrially released tray and tubular screws with a diameter up to 323 mm
• The bunker under the mixer with a geometrical volume up to 10 m3
• The individual bunker with a geometrical volume up to 5 m3 of the packing device in valvate bags
• The individual bunker with a geometrical volume up to 5 m3 of station of casing in μR (big run)
• The packing device in valvate bags - pneumatic, with a productivity up to 200 bags / hour
• All capacities of installation depending on the stored material are supplied with electric, pneumatic vibrators and plates of aeration
• Completely the automated control system provides the accuracy and speed of processes, formation of retseptny base and base of reports with information output on structure and volume of the made mixes
• Convenient platforms for service of mechanisms, provide simplicity in work.

But if you wish the individual decision, with an individual complete set of the equipment for production of dry technological mixes, our experts will try to propose the optimal solution.

The questionnaire for development of a technical solution.