Equipment for production of briquettes of RUF 800

The pressing part of a briquetting machine and its hydraulic drive are mounted on the bearer frame having elastic damping support. The cabinet of electroautomatic equipment is also located on a frame and integrated into a press. On a press the electrical wiring and laying of wires and cables in protective cases is made that allows to use it at once, previously having connected to the power supply network and to a material feed system.

The press and its system of automation are developed and constructed for work at a surrounding temperature from +5 °C to +40 °C. From the point of view of providing guarantee certificates, operating conditions, other than these, demand additional design features. Use of a press out of the covered rooms demands the additional options protecting a press from a frost and other adverse weather conditions.

Before delivery, in workshops of manufacturer, the press is subject long (to 20 sentry) to run with use of test material (sawdust), regarding identification of possible shortcomings.

Material supply:

• The loading hopper having the reinforced design from steel sheets with an aperture 600 x 1000 mm;
• Bunker volume pribl. 250 liters;
• Mixer with the drive electric motor of 0,55 kW for prevention of doming in material in the bunker;
• The feed screw conveyer with the drive electric motor of 1,5 kW;
• Time of loading of material is regulated by the programmable controller automatically.

Preliminary compression of material:

• Vertically located hydraulic cylinder.
• Pressure size for the camera of preliminary compression is established by the operator from a TP177B director's console depending on material;
• The control unit of stroke length of a cylinder rod which information is used for automatic adjustment of time of loading of material is located out of the camera of preliminary compression for protection against dust.

Main compression of material:

• Horizontally located master hydraulic cylinder.
• Pressure size for a master cylinder (to 300 bars) is also established by the operator from a TP177B director's console depending on material;
• Diameter of the cylinder - mm ø250, max. pressure force is 150 tons (at 300 bars).

Press productivity:

• Depending on installations - to 780 briquettes an hour.

Briquette size:

• 150 x 60 mm in section;
• Length of a briquette of 40 ÷ 110 mm depending on installations and a type/sizes of the bricketed material (the approximate weight of a briquette 835 gr with a length the 85-95th);
• Max. specific pressure pribl. 1.700 kg/cm ² (at 300 bars).

Leading dimensions/Weight:

• Pribl. (d x sh x c) 3200 x 2000 x 2100 mm;
• The specified sizes do not consider necessary working space for service of the press making 1000 ÷ 1500 mm;
• Weight (without options) pribl. 4.200 kg.