The pressing part of a briquette press and its hydraulic drive are mounted on the bearing frame having elastic damping support. The case of electroautomatic equipment is located on a frame and integrated into a press. The electrical wiring of a press is mounted completely, a cable are laid in protective trays. The press is ready for operation right after connection to the power supply network and system of supply of material.

Hydraulic system:

• The dual axial and piston pump with an adjustable productivity
  • pressure in system - max. 300 bars
  • main power effective (EFF1) the driving electric motor - 55 kW, 400 V / 50 Hz, 3 phase, 1500 rpm.
  • class of safety of IP 54
• Tank for hydraulic oil (950 liters) with the filters of the big size integrated into it by 4 10 microns for a filtration of the returned oil
• The compulsory cooling system of oil with the driving electric motor of 3 kW and 5 microns the filter of thin cleaning
• Hydraulic HLP 46 oil
• The protection device at an overheat and low level of hydraulic oil
• Redistribution of oil happens in system by means of electromagnetic distributive valves (Parker)
• Rods of all cylinders have the chromeplated covering
• The hydraulic tank is located on the bearing frame

Electric equipment:

• Case of electroautomatic equipment DIN EN60204-VDE 0113, a class of safety of IP 54 agrees
• Supply voltage of 400 V, 50 Hz
• Working supply voltage of electroautomatic equipment of 24 V (direct current)
• The programmable controller (PLC), the SIEMENS S7-200 model with the control panel and displays of information Siemens TP177B
  • display acting and a possibility of change of the established values of parameters of briquetting
  • management of work of a press
  • self-diagnostics and warnings of failures in work of a press
• The automatic start / feet of a press provided with the infrared sensors located in the loading bunker of material
• Control of provisions of cylinders is provided with contactless inductive trailer switches
• All electric motors have thermal protection against an overload

Press productivity:

• Depending on installations - to 8 briquettes in min.

Briquette size:

• Diameter is 100 mm in section
• Length of a briquette of 40 - 110 mm depending on installations and a type/size of the bricketed material
• Max. specific pressure, pribl. 3700 kg/cm ².

Overall dimensions/Weight:

• Pribl. (D x Shkh In) 2400 x 3250 x 2110 mm
• The specified sizes do not consider necessary working space for service of the press making 1000 ÷ 1500 mm
• Weight (without options), pribl. 6000 kg