Equipment for the cooling of milk in the flow smom-800
- Customer pickup,
- Courier
- In detail
- BrandСалутем, ООО
- Country of manufactureBelarus
- Type of coolerLamellar
- Weight650 kg
- DesignClosed type
- Volume- L
- Color-
- Profile2580 * 1180 * 1230 mm
Solving the problem of loss of quality milk.
Instant milk cooling (smom)
production of "Salute" Ltd. , Minsk, Belarus
Based on the characteristics of your dairy complex, we are ready to proizvestioborudovanie cooling milk in a stream smom
To do this, we need answers to the following questions:
The amount of milk nadaivaemogo per day.
Number of milkings per day.
The amount of milk for each udoyu.
The duration of each milking.
The maximum amount of milk per milking passing (peak load).
The start time and end time.
Specify the desired cooling temperature.
The equipment is fully executed of stainless steel AISI 304, which has a positive impact on dolgovechnosti. Vstraivaetsya in any process chain.
| index name | Marking equipment |
| Smom - 800 | |
| Type of | Regular (chiller) |
| Maximum cooling performance, | - |
| l / h | 800 |
| L / d | 10000 |
| The temperature of the cooled milk Sº | 6 ± 2 |
| Total cooling capacity, kW * h | 28 * |
| The performance of the refrigeration unit, kWh | 28 |
| Refrigerating units MTZ160 | one |
| Type refrigerant | R404A / 507A |
| Voltage supply, V | 380 |
| Current frequency, Hz | 50 ± 1 |
| Total power, kW | 25 |
| Holodogeneratora Dimensions, mm, not more: | - |
| - length | 2580 * |
| - width | 1180 |
| - height | 1230 * |
| Mass holodogeneratora kg, not more than | 650 |
| Milk pump CP 3.5 / 20 0.75 kW pump water WILO | one |
| Water pump WILO MHI 1603 - 1 E 3 400 - 50 - 2 1.8 kW | one |
| Water pump WILO EMHIL 504 - EM - 4,161,134 0.75 kW | one |
| Water pump WILO MHIL 505 - E - 1 - 230 - 50 - 2 1.5 kW | - |
| The heat exchanger (heat exchange) stainless steel housing. TR2 - 28 | one |
| The heat exchanger (heat exchange) stainless steel housing. TR2 - 48 | - |
| flushing system (in agreement with the customer) | Yes |
* This parameter can be changed after approval of the final project