- BrandОАО «Энергомаш»
- Country of manufactureRussia
Products: Oil coolers designed for industrial cooling oil circulating in the lubrication system and removing the friction heat produced during operation of the bearing, to buy from the manufacturer in Russia and for export.
Description:
The oil cooler is a shell and tube heat exchanger and consists of the following parts:
- housing
- bundle
- cover the inside
- the outer cover.
In case there is a bundle of the rolled tubes.
Along the walls of tubes installed type "disco - ring" that provides multi - port transverse flow tubes oil.
To exclude oil leakages from the course in the course through the technological gap to the body and the tubes used seals made of plastic.
Water flows inside the tube bundle on the two moves.
Cooling oil is due to dissipation of heat during its circulation in the lubricating system of the oil cooler with a cooling surface of 19 m / q. every.
Oil coolers have to be connected in parallel (two workers, one spare).
The presence of reserve oil cooler provides the ability to disable any of them for cleaning and the machine (lubricating system).
The upper tube plate clamped between the housing flange and the outer cover.
The outer cover has two connections for the supply and removal of cooling water and the inner cavity is divided by a partition, which improves the cooling oil. the lid is attached to the lower tube plate inside which is housed with clearance in a housing, providing freedom of movement when its thermal elongations of the tube bundle.
In the housing flange has an air outlet. For better oil cooling and heat rejection oil inlet pipe is located at the top and bottom of the oil outlet pipe. On pipes with a socket for installation of thermometers. At the bottom of the case there are taps to drain the oil and water during the audit.
The submarine and the branch line of water in the vicinity of the connection flanges must be installed valves for discharging air is used for cooling the oil in the lubrication system, and a liner under the thermometers. Beam tube can be easily pulled out of the oil cooler housing.
The parameters of finned tubes used in the oil cooler:
- material: A - 68 A - 70 M - 3M MNZH - 5;
- Diameter: 14h1,5; 14h1 mm;
- finning ratio: 1.85; 2.1;
- the tube length is from 300 to 6000 mm.
Oil coolers are widely used in various types of lubrication systems.
JSC "ENERGOMASH" produces oil supply units for cleaning, cooling and supplying fuel to the friction machine components and spare parts: coolers, tubular beams, filters, valves, separators, setting the oil pump, pipelines.
The main types produced by JSC "Energomash" oil coolers.
Cars | A type | MO number drawing | № drawing pipes beam |
H - 3600 | U1.79sbA | ||
- | MA - 2 - 6 | U2.sbG | U2.79sb2g |
K - 345 | MA - 3 - 9 | U3.79sbG | U3.79sb1g |
- | MA - 3,1 - 12 | U3.79sb | U3.79sb2 |
K - 1 80 - 1 31 - 1 | MR - 6 | U3.479sb | U3.479sb2 |
K - 890, K - 905 | MRU - 35 | U4.479sb | U4.479sb2 |
- | MRU - 35 | U4.479sb5 | U4.79sb7 |
H - 8500 h - 9000 | MRU - 3 | U5.479sb | U5.479sb3 |
K - 250 | M - 5 | U5.79sbG | U5 79sb2g |
K - 250 | M - 5 | U5.79sbB | U5.797sb2b |
- | MRUM - 3 | U5.179sb | U5179sb |
H - 2700 H - H 2900 - 3300 | MRU - 6 | U6.479SB | U6.479sb2 |
H - 30 K - 22 K - 1500 K - 1700 | MRUM - 19 | U7.179sb | U7.179sb1 |
H - 133, H - 175, K - 1 2 K - 1 5 K - 22 K - 380 K - 390 K - 500 K - 525 K - 605 K - 905 K - 1 500 K - 1700.1 - 30, | MRU - 19 | U7.479sb | U7.479sbZ |
K - 345, K - 1500 | MB - 8 - 12 | U8.79sbG | U8.79sb3 |
K - 3000 | MRU - 10 | U9.479sb | U10.479sb3 |
H - 540, H - 900, H - 1000 H - 13,000 K - 60 K - 500 K - 3000 | MRU - 10 | U10.479sb | U10479sbZ |
K - 250, K - 500 | UN10.79sbAN | U10797sb2n | |
- | MA - 3 - 9 | U13.079sb | U13.079sb2 |
K - 250 K - 270 K - 280 K - 350 K - 500 K - 1200 | MA - 5 | UN13.79sbA | UN4.79sb2 |
- | MBM - 8 - 12 | U18.179sb | U18.179sb2 |
- | MB - 20 - 26 | U21.079sb | U21.079sb2 |
K - 15 - 41 - 1 | MB - 20 - 50 | U22.079sb | U22.079sb2 |
H - 6500 - 11 - 4 | M - 0.5 | 1301.79sbA | 1301.79sb2 |
H - 3500 H - 6500 H - 6700 H - 7500 H - 7700 | M - 0.5 - 1 - lion | 1301.79sbB | 1301.79sb2 |
- | M - 0.51 - Lion | 1301.079sb | 1301. 079sb2 |
H - 6500 - 11 - 4 | MH - 0,5 - lion | 1301.079sbB | 1301.079sb2 |
N - 7500 N - 12000 | MRU - 19 | 1318.479sb | U7.479sbZ - 02 |
K - 45 - 21 - 1 | M - 1.4 - 15 | 1359.79sb | 135979sb2 |
H - 7500 | M - 5 | 1507.079sb | 1507.079sb2 |
K - 45 - 21 - 2 | M - 2 - 15 | 1359.079sbA | 1359079sb2a |
K - 600 WP - 045 - 04 | 3333 479sb | U7. 479sb3 - 02 |
Method of payment: Prepayment
Shipping Form: EXW, of FCA - Russia, Chudovo, Novgorod region.
Shipping details:
Station: Miracles - Moscow Oktyabrskaya railway. d.
station code: 042003
Company code: 3613
The company produces:
- centrifugal blower
- compressors
- Oil coolers
- Air coolers (intermediate and end)
- High pressure ventilators
- Fan high pressure for general industrial use
- Compressors type RTKV
- Plain bearings (inserts)
- heat transfer elements
- Regulating valves - the valve flap droselnye.
- Seals for centrifugal machines (compressors, blowers.
- Blower pneumatic VI 4.5 / 4250 PS