Spindle Limit Switch Base
- Customer pickup,
- Courier
- In detail
- ManufacturerРосавтоматизация
- Country of manufactureRussia
Spindle limit switch Base wholesale and retail from the manufacturer for export.
The spindle limit switch is used to control the movement of industrial equipment. It works as an auxiliary controller for an electric motor through a power interface, like a PLC or a starter. Its shaft is connected to the engine and, after a certain number of revolutions, the cams activate the switches, thus starting the predetermined movements.
Features w pindelnogo limit switch Base :
A worm gear and helical gear in combination with one or more pairs of straight gears are used to transfer motion from the input shaft to the output shaft. Possible gear ratio from 1: 15 to 1: 1500 is achieved
using various combinations of gears between the input and output shafts, which are connected to cams that act on the switches. Each cam can be adjusted with great precision thanks to the adjusting screws. The overall dimensions allow for installation in confined spaces. The auxiliary switches have normally open contacts.
Options:
The Base switch can be equipped with a cam set with a maximum of 4 switches. A limit switch is available with direct control for direct motor control.
The limit switch can be equipped with a flange for direct connection to the motor. Various markings and colors are available.
Materials:
The transmission and drive shaft are made of stainless steel to prevent
oxidation and wear. Gears and drive sleeves are made from self - lubricating technopolymer selected to minimize wear and ensure consistent alignment of couplings. Bushings
made of powder bronze, molded into the bottom of the limit switch to optimize shaft rotation and prevent rubbing with plastic.
Parts and components are made of durable material and protect the equipment from dust and moisture.
Standards - Marking - Certification:
- Compliance with EU Directives:
2006/95 / CE: Low Voltage Directive
2006/42 / CE Machinery Directive
- Compliance:
EN 60204 - 1 Safety of machinery - Electrical equipment of machines
EN 60204 - 32 Safety of machines - Electrical equipment of machines
- Requirements for hoisting - and - transport vehicles
EN 60947 - 1 low voltage distribution and control devices
EN 60947 - 5 - 1 low voltage distribution and control devices -
Control devices and switching elements -
Electromechanical control circuit devices
EN 60529 Degree of protection provided by housing
- Marking and Certification: CE
Main technical characteristics:
- Store at temperature: - 40 ° C / + 80 ° C
- Operate at temperature: - 40 ° C / + 80 ° C
- Degree of protection: depending on the assembly IP 42 or IP 65 or IP
66 / IP 67 / IP 69K
- Insulation category: class II
- Maximum angular speed: 800
rpm
- Cable entry: cable clamp M16
- Marking and Certification:
version IP42 or IP65 CE
version IP 66 / IP 67 / IP 69K CE, (pending U, c)
Microswitch Specifications:
- Utilization category: AC 15/3 A / 250 V
- Rated thermal current: 10 A -
Insulation rated voltage: 300V
- Service life: 1,000,000 operations
- Connections: Faston flat contacts 6.3 mm or screw
terminals
- Wires: 1 × 2.5 mm², 2 × 1.5 mm²
- Marking and certification: CE U
(pending c)
Snap action switch PRSL0003XX has
changeover contacts 1NO + 1NC
Snap action switch PRSL0011XX has
changeover contacts 1NO + 1NC.
All NC contacts are normally open.
Buy w pindle limit switch Base wholesale and retail from the manufacturer at a bargain price.
We deliver w pindelnogo limit switch Base and wholesale in all regions of Russia, Azerbaijan, Belarus, Georgia, Kazakhstan, China, Tajikistan, Turkmenistan, Uzbekistan, Ukraine, Armenia, Moldova, Kyrgyzstan, Germany, UAE, UK, Romania, France and etc.