Seller
Kazakhstan, Almaty
(View map)
(View map)
+7(7
Display phones
13
13 years on Allbiz
Quickly responds
Technical characteristics
- BrandKazstanex
- Country of manufactureRussia
Description
Press mechanical KD2124
[Nominal force is 250 kN, Hod of the ram the 80-5th, Weight is 2200 kg.]
[Nominal force is 250 kN, Hod of the ram the 80-5th, Weight is 2200 kg.]
Press krivoshipny KD2124 - the odnokrivoshipny mustache opened simple action. 250 - for performance of various operations of cold stamping of sheet material: cuttings down, punched holes, superficial extract etc.
Can work both on single, and at the continuous courses (at equipment as automatic giving — - shiberny, roll). The press equipped with automatic giving can be used in automatic and product lines. Find broad application at any type of production: small-scale, serial, mass
Features of a design of a mechanical press of KD2124:
- The bed is cast, pig-iron, a box-shaped form, high rigidity, preservation of precision parameters at the long term of operation is subjected to aging for removal of internal tension,
- Rigidly blocked coupling brake provides a reliable stop of the ram in VMT
- Convenient adjustment of optimum gaps between working disks in process of their wear
- Ram counterbalances, are intended for elimination of influence of weight of the ram and the top half of a stamp for work of a press and for prevention of any lowering of the ram in emergency cases (break of the screw of a rod or hairpins)
- The wedging device for a press conclusion from a raspor
- Central lubrication system of the main couples of friction
- Electroblocking for safe service
- Contactless box of management
Technical characteristics: | |||||||||
Nominal force, kN | 250 | ||||||||
Ram course adjustable, the greatest, mm | 80 | ||||||||
Ram course adjustable, the smallest, mm | 5 | ||||||||
Frequency of the course of the ram, continuous, unregulated, min.-1 | 180 | ||||||||
Frequency of the course of the ram, single, min.-1 | 56 | ||||||||
Table sizes, from left to right, mm | 500 | ||||||||
Table sizes, in front back, mm | 340 | ||||||||
Distance from a ram axis to a bed, mm | 190 | ||||||||
The greatest distance between a table and the ram in its lower situation at the greatest course, mm | 280 | ||||||||
Distance between bed racks in light, mm | 250 | ||||||||
Thickness of a podshtampovy plate, mm | 75 | ||||||||
Sizes of the lower surface of the ram, from left to right, mm | 355 | ||||||||
Sizes of the lower surface of the ram, in front-back, mm | 235 | ||||||||
Air pressure in a network of a press, MPa, not less | 0,35 | ||||||||
Air pressure in a factory network, MPa, not less | 0,8 | ||||||||
Consumption of compressed air (in the mode the single course), liter/cycle | 0,4 | ||||||||
The opening sizes in the ram under a stamp shaft, diameter, mm | 40H9 | ||||||||
The opening sizes in the ram under a stamp shaft, depth, mm | 60 | ||||||||
The greatest course of a pusher in the ram, mm | 30 | ||||||||
Bed tilt angle, hail | 0 | ||||||||
Power el. engine of the drive, kW pr % PV=40 | 3,2 | ||||||||
Technological work, at the continuous courses, J | 210 | ||||||||
Technological work, at the single courses, J | 420 | ||||||||
Overall dimensions, mm | - | ||||||||
- from left to right | 1200 | ||||||||
- in front-back | 1220 | ||||||||
- height | 2410 | ||||||||
Weight, kg | 2200 |
-
Technical characteristics: | |||||||||
Nominal force, kN | 250 | ||||||||
Ram course adjustable, the greatest, mm | 80 | ||||||||
Ram course adjustable, the smallest, mm | 5 | ||||||||
Frequency of the course of the ram, continuous, unregulated, min.-1 | 180 | ||||||||
Frequency of the course of the ram, single, min.-1 | 56 | ||||||||
Table sizes, from left to right, mm | 500 | ||||||||
Table sizes, in front back, mm | 340 | ||||||||
Distance from a ram axis to a bed, mm | 190 | ||||||||
The greatest distance between a table and the ram in its lower situation at the greatest course, mm | 280 | ||||||||
Distance between bed racks in light, mm | 250 | ||||||||
Thickness of a podshtampovy plate, mm | 75 | ||||||||
Sizes of the lower surface of the ram, from left to right, mm | 355 | ||||||||
Sizes of the lower surface of the ram, in front-back, mm | 235 | ||||||||
Air pressure in a network of a press, MPa, not less | 0,35 | ||||||||
Air pressure in a factory network, MPa, not less | 0,8 | ||||||||
Consumption of compressed air (in the mode the single course), liter/cycle | 0,4 | ||||||||
The opening sizes in the ram under a stamp shaft, diameter, mm | 40H9 | ||||||||
The opening sizes in the ram under a stamp shaft, depth, mm | 60 | ||||||||
The greatest course of a pusher in the ram, mm | 30 | ||||||||
Bed tilt angle, hail | 0 | ||||||||
Power el. engine of the drive, kW pr % PV=40 | 3,2 | ||||||||
Technological work, at the continuous courses, J | 210 | ||||||||
Technological work, at the single courses, J | 420 | ||||||||
Overall dimensions, mm | - | ||||||||
- from left to right | 1200 | ||||||||
- in front-back | 1220 | ||||||||
- height | 2410 | ||||||||
Weight, kg | 2200 |
-
Similar company products
Contact the seller
Press mechanical KD2124