Briquette - press PBU-070-800 M

Mechanical impact press for making briquettes PBU - 070 - 800 M is used for making cylindrical briquettes of "Nestro" type from vegetable raw materials. This type of press is the best option for briquetting waste from the main production with the lowest operating and production costs.

Shock mechanical press allows you to produce industrial and retail briquettes.

Raw materials - straw, reeds, wood, sunflower husks.

The kit includes - a briquette cooling line, a raw material dosing bin, a cooling unit for heating oil, cooling collets, a control panel.

Production time - 2 - 3 months

Terms of payment - 50% prepayment, 50% upon completion before shipment

Warranty - 12 months.

Shipment - Zhytomyr region, Berdichev, st. Semenovskaya, 116

Delivery - carried out by hired transport, transport of the customer

Personnel training, commissioning - 2 days (not included in the cost of equipment)

Benefits of cooperation

• price from the manufacturer

• individual approach

• organization of delivery of equipment (not included in the price of equipment)

• demonstration of finished equipment in operation at Ukrainian production facilities

 

 

 

Specifications

Model	PBU - 060 - 400	PBU - 070 - 800	PBU - 070 - 800 M *	PBU - 080 - 900	PBU - 080 - 900 M *	PBU - 090 - 900	PBU - 090 - 900 M *
Performance	300 - 400 kg/h	500 - 700 kg/h	500 - 700 kg/h	800 - 1000 kg/h	800 - 1000 kg/h	900 - 1200 kg/h	900 - 1200 kg/h
Briquette diameter	60mm	70mm	70mm	80mm	80 mm	90mm	90 mm
REQUIREMENTS FOR RAW MATERIALS
Grinding degree	1 - 5 mm	1 - 5 mm	1 - 5 mm	1 - 5 mm	1 - 5 mm	1 - 5 mm	1 - 5 mm
Humidity	8 - 12%	8 - 12%	8 - 12%	8 - 12%	8 - 12%	8 - 12%	8 - 12%
INSTALLED CAPACITY OF ELECTRICAL EQUIPMENT
Main engine	22kw	45 kW	45 kW	55 kW	55 kW	55 kW	55 kW
Worm gear motor reducer dosing auger	2.2kW	3 kW	3 kW	3 kW	3 kW	3 kW	3 kW
Worm gear motor for auger feeding into the pressing chamber	2.2kW	3 kW	3 kW	3 kW	3 kW	3 kW	3 kW
Two - stage worm gear motor reducer hopper breaker	-		3 kW		3 kW		3 kW
Oil heater	6 kW	6 kW	6 kW	6 kW	6 kW	6 kW	6 kW
Lubrication pump motor	0.75 kW	0.75 kW	0.75 kW	0.75 kW	0.75 kW	0.75 kW	0.75 kW
oil cooler	0.01 kW	2 x 0.01 kW	2 x 0.01 kW	2 x 0.01 kW	2 x 0.01 kW	2 x 0.01 kW	2 x 0.01 kW
CONNECTION
Three - phase network	380V 50Hz	380V 50Hz	380V 50Hz	380V 50Hz	380V 50Hz	380V 50Hz	380V 50Hz
DIMENSIONS
Length	2960mm	3300 mm	3300 mm	3700 mm	4000 mm	4000 mm	4000 mm
Width	910mm	1050 mm	3850 mm	1160 mm	4000 mm	1160 mm	4000 mm
Height	1940mm	2200 mm	3250 mm	2600 mm	3500 mm	2600 mm	3500 mm
Briquette cooling line	7000mm	7000 mm	7000 mm	10000 mm	10000 mm	10000 mm	10000 mm
Weight	2500 kg	3500 kg	4000 kg	5000 kg	5500 kg	5500 kg	6000 kg

M * is equipped with a dosing hopper with a volume of 3 m ³ and two - sided loading of raw materials into the pressing chamber.

The press produced by PE "Briquetting Technologies" has a number of advantages compared to analogues produced in Ukraine:

1. More than 400 units of presses were produced in different modifications and performance

2. In the production of presses, imported components are used, such as a gear motor, an oil station, oil level sensors, frequency converters, filters, cuffs, oil and much more.

3. The possibility of equipping the press with additional options, such as a raw material sensor in the bunker, lengthening the cooling line, equipping the press with a hopper with a volume of 1.5 or 3 m3/cube, installing a controller to control the press

4. Forced lubrication system, without the use of high - pressure hoses to supply oil to the working parts of the press - the advantage of this solution is that the press will not fail due to a break in the high - pressure hoses.

5. Lubrication system that prevents the press from starting without oil supply to the crank mechanism.

6. On the press shaft, the rolling bearings are replaced with bronze bushings - this solution allows you to significantly increase the service life of the press before repair work and reduce noise during the operation of the press

7. The presses are equipped with an oil heating and cooling unit - the oil cooler allows you to keep the oil temperature not higher than 500C to maintain the quality properties of the oil during the operation of the press, oil heating up to 400C is designed to heat the press oil before starting at low temperatures

8. The presses are equipped with a collet cooling unit - used to remove excess temperature from the press collets. Necessary for briquetting raw materials with excess moisture.

 

 

 

OUR EQUIPMENT IS INCLUDED IN THE LIST OF MACHINERY AND EQUIPMENT FOR AGRICULTURAL COMPLEX, THE COST OF WHICH IS COMPENSATED FROM THE STATE BUDGET.