(View map)
- BrandНефтетехника
- Country of manufactureKazakhstan
Mernik model 2 discharges like M2r with a rated volume of 2000 dm3 is intended for bezdemontazhny checking of reservoirs, liquid counters, and also for measurement of volume amount of liquid.
http://www.neftetehnika.kz/products/view/Merniky.html
Mernik is mounted:
- on a transfer table, movement of a platform with a mernik manual.
- on the transfer table executed on the basis of the Tonar trailer, transportation of a platform with a mernik the mechanical trasport facilities equipped with the traction coupler on OST 377.001.096 - 89 and the plug socket in accordance with GOST 9200 - 76 with a speed no more:
- 20 km/h on roads with a cobbled covering and soil;
- 40 km/h on roads with an asphalt coating.
Transportation and movement of a platform with the filled mernik is not allowed.
Operating conditions:
- Ambient air temperature is from - 40 With to + 40 C;
- Upper working value of the atmospheric pressure of 106,7 kPa (800 mm hg);
- Upper value of air humidity of 100% at + 25C.
Technical datas
The rated volume of the measured dose, dm3 | 2000 |
Limits of the allowed relative error at measurement, % | + - 0,1 |
Leading dimensions of a mernik, mm, no more, than diameter | 1550 |
Height | 2600 |
Leading dimensions of a transfer table with a mernik, mm, no more: | |
Length | 3000 |
Width | 2000 |
Height | 3100 |
Mass of a mernik, kg, no more | 380 |
The mass of a transfer table with a mernik and kompletuyushchy, kg, no more | 850 |
Completeness
Name | Quantity |
Mernik exemplary M2r - 2000 | 1 pieces. |
Transfer table | 1 pieces. |
KM electric pump TU 3631 - 12005806720 - 99 | 1 pieces. |
The sleeve which is inhausting | 1 pieces. |
The sleeve is pressure head | 1 pieces. |
Connection sleeve | 1 pieces. |
Device of remote control of the electric pump | 1 computer. |
The wire grounded | 10 m. |
Passport A 209.00.00.00 of PS | 1 pieces. |
Eksplutatsionny documents on component parts | 1 computer. |
Scheme
1 - transfer table, 2 - ladder, 3 - water - indicating window, 4 - scale, 5 - seal, 6 - thermometer, 7 - cover, 8 - defoamer, 9 - mouth, 10 - the crane for bringing liquid to a mark of rated capacity, 11 - level ampoule, 12 - reservoir, 13 - electric pump, 14 - the sleeve which is inhausting 15 - the sleeve is pressure head, 16 - coil, 17 - crane drain, 18 - connection sleeve, 19 - jack, 20 - grounding chain. |
Principle of work
The principle of work of a mernik consists in the following: when carrying out test and measuring works, in previously moistened working fluid the mernik via the defoamer moves a dose of working fluid. After filling of a mernik temperature measurement of working fluid is performed and on the corresponding marks in a scale the assessment of volume of the liquid given in a mernik is made.
At a temperature of the liquid differing from + 20C it is necessary to consider the correction on change of volume of a mernik. After carrying out check draining of working fluid from a mernik in foreign capacity by means of the electric pump is made. The remains of working fluid merge via the crane on the union of the drain crane of a mernik. More detailed information: http: //www. neftetehnika. kz/products/a - 320.html