Mastic IZHORA IDB-G90
- 0.88 EUR/kg. - from 250 kg.
- Customer pickup,
- Courier
- In detail
- BrandИжора
- Country of manufactureRussia
- Weight25 kg
- Number of componentsOne-component
- TypeHot application
- Type of masticBitumen-rubber
- PurposeConstruction
- ConsistencySolid
MBR - G90 IZHORA mastic is the high - quality construction material made of high quality components, meeting the modern requirements and possessing excellent characteristics and properties.
Description of material IZHORA MBR - G - 90:
Mastic of hot type of application bituminous and rubber, is made on the basis of high - quality bituminous binding, with addition of polymeric modifiers and a number of complex fillers. The structure is used hot. Material is homogeneous mass of black color.
Scope:
1) isolation of metal, concrete, reinforced concrete, brick designs from soil corrosion, from an atmospheric precipitation, from ground waters, from weak and sredneagressivny liquid environments, sredneagressivny firm environments;
2) protection against soil corrosion of oil pipelines in covering No. 13 designs in accordance with GOST 51164 "Pipelines steel main. The general requirements and protection against corrosion" with a diameter of 820 mm and at capital repairs of oil pipelines with a diameter up to 1220 mm;
3) laying under a tram rail.
Advantages of materials:
1. high level of adhesion;
2. high heat resistance;
3. firmness in hostile environment;
4. high shock durability;
5. resistance to cathodic polarization;
6. resistance to transitional resistance;
7. low water absorption;
8. mastic bituminous and rubber insulating conforms to requirements of GOST 15836 ". Specifications".
Typical objects of use of mastics:
1) pipelines;
2) tanks for storage of fuel at gas station;
3) roads;
4) tram ways;
5) bridges;
6) port constructions.
Restrictions:
Application in contact is not allowed:
with organic solvents and oils;
with the high - concentrated acids and alkalis.
Technical characteristics of structure
Technical characteristics of material |
Indicators |
Temperature of a softening, °C (KiSh) |
100 |
Depth of penetration of a needle at a temperature of + 25 °C, 0, 1 mm |
20 |
Tensile properties at a temperature of + 25 °C, cm |
3, 7 |
Elasticity at a temperature of + 25 °C, % |
80 |
Durability of coupling with concrete at a temperature of + 20 °C, MPa |
0, 5 |
Durability of coupling with metal at a temperature of + 20 °C, MPa |
2, 0 |
Flexibility temperature on a core with a diameter of 50 mm at a temperature, °C |
– 15 |
Fragility temperature across Fraas, °C |
– 17 |
Operation of the processed surface in the conditions of hostile environment, rn |
3 – 12 |
Temperature of application (environment) is not lower, °C |
– 10 |
Climatic zones of application |
in total |
Density in the cooled state, average value, kg/dm3 |
1, 05 |
Material consumption at a thickness of layer of 2 mm, kg/sq. m |
2, 1 |
Warranty period of storage, months |
24 |