Injection molding machine TV600N / 5300

• In stock in Baranovichi ! ! ! A screw diameter of 85mm.

• The injection unit is built on a single - cylinder design that does not require balancing;
• Precise positioning of the injection unit;
• The direct - acting locking mechanism with four cylinders ensures reliable locking of the injection mold, while perfectly protecting the working surfaces of the mold from damage when foreign objects hit them.
• The design of the locking mechanism (locks drive) is convenient for maintenance and repair.
• The use of linear ball or roller guides allows for precise movement of the sliding plate while saving energy.
• The increased opening stroke allows you to work with deep molds with a width exceeding the column spacing.
• Expanded area for the installation of injection molds and inter - slab spacing. The simple two - plate design facilitates maintenance and does not require high lubrication costs compared to knee - lever injection molding machines. All units and mechanisms are easily accessible for repair and maintenance.
• Easy and quick adjustment to the height of the form is ensured by the use of modern electronic systems and an original program that guarantees the safety and ease of installation of forms.
• The injection unit, built on a single - cylinder design, guarantees a better casting and does not require precise adjustment (balancing) of the injection cylinders as in two - cylinder injection units.
• The modern design of the hydraulic system is based on the use of servo drives, which guarantee minimum energy consumption and high - quality control of the casting process. On request, it is possible to install power units with proportional pressure and flow pumps.
• The control system is based on modern KEBA controllers (Austria) and BSZ software developments. The presence of the original program allows us to fulfill any customer's requests.
• The presence of stands allows you to work with the customer online.
• Extensive experience in designing, manufacturing machines and working with customers of injection molding machines is taken into account in the new line of the TV series. Modern designs take into account all the comments on reliability and ease of maintenance received from consumers of injection molding machines over the past 15 years.
• The optimal design of mechanical assemblies, hydro and electric drives, the choice of component parts (in terms of the main parameters "price - quality") allows you to compete in quality with the main manufacturers of injection molding machines, while guaranteeing minimum costs for the production of products.

TECHNICAL CHARACTERISTICS OF THERMOPLASTING MACHINE TV600N / 5300:

• Screw diameter 80/85/90 mm
• Injection cylinder stroke 460 mm
• Maximum injection volume 2312/2610/2926 cm3
• Injection weight 2080/2400/2633 g
• Injection speed 513/580/650 cm3 / s
• Injection pressure 229/203/181 MPa
• Screw revolutions 3 - 190 rpm
• Injection unit stroke 850 mm
• Clamping force 6000 kN
• Moving plate travel (maximum) 1800 mm
• Mold height (min / max) 400 - 1050 mm
• Distance between plates 2200 mm
• Distance between columns 915x915 mm
• Ejector force 182 kN
• Pusher stroke 300 mm
• Hydraulic pressure 17, 5 - 20 MPa
• Oil tank capacity 900 l
• Hydraulic system drive power 37 + 37 kW
• Number of heating zones 5 + 1 pc.
• Heaters power 47, 9 kW
• Overall dimensions, ( LxWxH ) 9600x2400x2200 mm
• Weight 23 t