Electronic Controller of Current (ECC)

The Electronic Controller of Current (ECC) gives a signal of approach of an emergency event according to the set parameters in the form of the opened/closed contact of an electronic key and a light signal at approach of one of the next events:
- short circuit;
- electroinstallation idling (dry course);
- excess of current of electroinstallation is higher than nominal;
- excess of current of electroinstallation is higher than the most admissible;
- to loss of one or two phases;
- a distortion of phases on current;
- low resistance of isolation (<500кОм±10% for modification of Sq.m, M4, M5, M8).

The controller works together with the PU-05 control panel which provides data read-out and adjustment of installations of the controller. One panel can serve any number of controllers.

Controllers EKT-5-Mkh and EKT-10-Mkh can use measuring transformers of current with rated currents of a secondary winding 5A.

Therefore they can be used on any electrified unit which is not demanding a technological order of inclusion (the pump, the boiler, the melting furnace, lighting, etc.) with the electric motor or electric equipment of any power and any tension.

Controllers are easy-to-work and executed at very high technological level.
Therefore are extremely reliable.

EKT has the interface exit (RS-232; RS-485), that gives the chance of use it in projects of industrial control system and scheduling.