Electromagnetic valve
- Customer pickup,
- Courier
- In detail
- BrandПластиКом
- Country of manufactureRussia
- Drive unitElectromagnetic
| Power consumption, W | 8 |
| Pressure, mbar | to 500 |
| Weight, kg | 0,45 |
| Connection, inch | 1/2 |
| Material | polypropylene |
| The price from a warehouse in Tyumen | 6 000 rub. |
It is intended for switching of air supply in two directions from one compressor.
The valve can be used in different devices and technological systems of low pressure, as a distributor gear for remote automatic control of an air flow.
How the valve in treatment facilities works?
In the absence of supply of electricity the air flow from the compressor comes to an opening through passage 1 and moves in aerators which are connected to an opening through passage 2. At short circuit of the monitor sensor of level tension on the valve moves and the hub of an electromagnet is involved. There is an overlapping of an opening 2 and opening of a marching opening 3.
On an air duct the distribution valve is installed in any situation observing the requirement of coincidence of the movement of air to an arrow on the valve case. Temperature condition for the distribution Mivalt valve is ranging from-15 C to +80 C. The valve has moisture-proof execution of IP 65.
Attention! For the purpose of warning of effects of possible differences of tension, it is recommended to share the electromagnetic valve with the power conditioner.