Currency EUR
Electric boiler (monoblock): EVPM-3 of 3 kW – Celikov A.V. (Teploprofi), IP | all.biz
Buy Electric boiler (monoblock): EVPM-3 of 3 kW
Electric boiler (monoblock): EVPM-3 of 3 kW

Electric boiler (monoblock): EVPM-3 of 3 kW

In stock
Price:
37.89 EUR
This offer is obsolete!
Shipping:
Seller
Russia, Novosibirsk
(View map)
+7(9 
Display phones
Technical characteristics
  • BrandТеплоТех
  • Country of manufactureRussia
Description

Electric boiler (monoblock): EVPM-3 of 3 kW

 

Application

For water heating of rooms, the private houses having the open heating system working with a pressure no more than 1,5 atm. The electric water heater can independently work or together with the coppers using solid fuel.

Coppers electric EVPM are applied to heating of the inhabited and production rooms having open heating system with natural or compulsory circulation. Electric coppers work under a certain pressure (depending on heating copper power).

Also coppers electric can independently be used or together with heating coppers, using solid fuel. At the same time electric coppers are calculated on long work without supervision at observance of rules of installation and operation.
All coppers electric are intended for heating in areas with a temperate and frigid climate in the ventilated rooms with the inexplosive environment at a temperature of air from 1 ° to 40 °C.

Device

The electric copper of heating consists of the steel case in which there is a tank with tubular electric heaters. The copper electric has the built-in control panel intended for switching of power and regulation of temperature of heating of the heat carrier. As the regulator of temperature of an electric copper serves the capillary thermostat fixed in the top part of the tank. The thermoswitch serves for additional protection against an overheat of electric coppers of heating.
Top pressure head and lower the return branch pipes are intended for accession of a copper in electric system of heating. On the face the electric copper has the handle for regulation of temperature of the heat carrier, light-signal indicators of inclusion of food and heating, switches of blocks of heaters. On a side part of a casing of an electric copper of heating openings for input in the panel of a cable of food and cable of connection of the regulator of air temperature indoors are located.
In the control panel of an electric copper the contact panel for a supply of network food, a terminal block for connection of the portable regulator of air temperature indoors, the power relay, the switching blocks of electric heaters, the capillary thermostat allowing to establish and maintain the necessary temperature of the heat carrier in system of heating are located. Installation in a copper electric is executed by a wire of PRKA TU 16-505.317-76, heat resistance minus of 60 plus 180 degrees Celsius.

Installation

To execute installation of an electric copper in system of heating so that to it access for service and repair was provided. For the purpose of improvement of conditions of circulation of water in system of heating electric to establish a copper so that its lower branch pipe was below radiators of heating system.

Connection of a copper to electric network should be made via the device of protective shutdown (DPS) or the entrance automatic switch calculated on current according to heating copper power. The OUZO installation or the automatic switch should be made in the same room near an electric copper of heating.

Service of coppers electric

At operation of electric coppers it is necessary to watch daily its work, paying special attention to lack of a leak of water in places of connections and existence of sufficient water level in system of heating, checking visually reliability of accession of the grounding conductor. Water level in a broad tank of electric system of heating needs to be maintained at the necessary level, periodically filling up with water.
In winter time if it is required to stop heating by an electric copper for long term, it is necessary to merge in order to avoid freezing water from heating system. It is expedient to reuse the merged water, especially at the increased rigidity of drinking water.
Before a season of heating and every two months operation needs to make maintenance of a copper electric:
– to check a state and fastening of conductors and clips on an electric copper -
– a condition of electric equipment of a copper electric -
– to clear an electric copper of pollution.
For removal of a scum it is necessary to carry out periodic cleaning of the TEN heating blocks of an electric copper, using the medicine "Antinakipin" or to it similar detergents. Works on maintenance of electric coppers of heating have to be performed by the expert having qualification group on electrical safety not below the third. At the same time works have to be conducted at the heating copper disconnected from electric network.


The main
The producer - Heatthat
Country producer Russia
Rated power - 3.0
Heat carrier Water
Type of fuel Electricity
Efficiency - 94.0
Purpose of a copper - One-planimetric
Way of installation Wall
Tenovy heater Yes
Quantity TENOV 3
Heat exchanger material - Steel
Weight 7.6 (kg)
Warranty period - 12
Additional characteristics
Power steps 1,0/2,0/3,0 kW
Supply voltage 220 V
The area of the heated rooms with a height of ceilings up to 3 m 30 sq.m.
Regulation of temperature of the heat carrier the thermostat to 85 °C
Dimensions 255х135х440
Weight 7.6 kg
Contact the seller
Electric boiler (monoblock): EVPM-3 of 3 kW
Electric boiler (monoblock): EVPM-3 of 3 kW
Shipping method
Compare0
ClearSelected items: 0