Elastomeric Fabric | Reinforcing Fabric | 30cm * 100m

Elastomeric Fabric | Reinforcing Fabric | 30cm * 100m

Elastomeric Fabric - 30 cm * 100 m - reinforcement fabric of a nonwoven polyester fabric especially designed for use with polymers applied in liquid form.

Elastomeric Fabric - 30 cm * 100 m - is used to enhance the adjacency to the parapet, chimney, drains, and seams, gaps, joints, cracks and other potential distortions. It has an unusual combination of high strength and elasticity. Fabric very soft, fits well on any raised surfaces perfectly absorbs, wetted and encapsulated liquid roofings, forming a monolithic (seamless) waterproofing coating of individual elements or the entire roof surface. It is resistant to organic solvents.

Applications: designed for reinforcing roofing surfaces which have numerous fissures, seams or discontinuities, and also for amplification and drains rainwater heads, adjacency to parapets, ventilation ducts and chimneys, penetration pipes and cables. At the request of the project is installed on the surface of the entire roof.

Application: in se surfaces must be dry and free of dust, grease, oil and other contaminants that can degrade the adhesive contact with the surface. Recessed into the layer of crude ELASTOMERIC film coatings deposited at a rate of 0.4 - 0.8 kg / m2, depending on the profile surface, so as to completely soak composition. Then additional amount applied on top of the liquid coating (wet on wet) at a rate of 0.4 - 0.6 kg / m2 to fully encapsulated fabric, preventing the formation of folds or air pockets neprokrasov. The overlap at the edges of the fabric pieces should be at least 5 cm each side.

View all manufactured products, please visit the company https://elastomeric.ru.com