Elastic waterproofing two-component LAHTA

Scope Lahta elastic waterproofing two - component:

It is used for works on a waterproofing of the concrete, stone, reinforced concrete, brick foam - concrete, gas - concrete bases. Designs, elements of buildings and constructions of different function during repair, during actions for reconstruction and restoration, old and decayed objects, and also in new construction and housing construction.

The material LAHTA an elastic waterproofing can be applied both in rooms, and with outside, that is the structure to suit for internal and external works. It is possible to apply waterproofing structure as from a water pressure, that is with a positive pressure of water, and with opposite, that is with a negative pressure of water.

• It is used for a waterproofing of the constructions of civil and industrial engineering subject to the raised treshchinoobrazovaniye which are exposed to the draft and vibrations;
• It is applied to works on a waterproofing of the bases of combined constructions of civil and industrial function which are subject to deformations (temperature and mechanical);
• Material is intended for actions for a waterproofing of flat and inclined concrete and metal roofs;
• Use structure for the device of chemical protection of concrete (reinforced concrete), metal designs and elements of buildings against effect of ground waters and sredneagressivny environments, and also prevention of carbonization and to influence of anti - freezing salts;
• Are applied as a waterproofing of metal products, including fittings, channels, etc. , and also a metalwork, including pipes, screens, etc.

Description of a materialalakht elastic waterproofing two - component

Represents waterproofing two - component structure.

The first component of structure is on the essences the dry construction mix made on cement binding with addition of mineral fillers, the quartz fractioned sand modified by chemical and active additives.

The second component - an elastifikator is the liquid emulsion intended for a zatvoreniye, it represents viscous liquid of milky - white color.

In a look, ready for application, the structure represents pastelike the rastvorny mix possessing in the gray color.

In the hardened look, solution represents an elastic membrane, in the form of a waterproof film of gray color.

Typical objects of application

• For a waterproofing hydrotechnical constructions: tanks (including firefighters), pools, wells, port constructions, treatment facilities, dams, dams, locks, channels, etc. ;
• In objects of civil engineering: in houses, on objects of culture and art, in underground constructions (in cellars, parkings, garages, transitions, air - raid shelters, etc. );
• On objects of industrial construction, namely in production rooms, coolers, mines, combined heat and power plant, etc. ;
• On objects of transport infrastructure, including tunnels (automobile, subway, railway, engineering communications), underground passages, bridges, overpasses, etc. ;
• For a waterproofing of elements of construction objects: bases, roofs, facades, bathrooms, balconies, etc.

Advantages

• it can be applied on the damp basis (without free water);
• possesses good elasticity, including, at low teperatura;
• protects from influence of CO2 of air;
• has the high durability of coupling with a basis and brand on water tightness that allows to receive waterproof, chemically resistant covering;
• does not contain toxic components; at long stay in water keeps elasticity;
• it can be used both for external, and for internal works;
• it is applied in all climatic zones.