Products of other enterprises
Description
The electrohydropusher is intended for control of mine mechanisms with the reciprocating and shaking movements. Mining conditions of application: mines dangerous on dust and gas (methane) to supercategory inclusive
Value parameter
The nominal pushing force, N 3000
Course of rods, mm 250
Time of the working course at a nominal axial force, sec., no more than 1,5
Idle time at the nominal pushing force, sec., no more than 0,7
Weight, kg, no more than 160
Height, mm 860
Height from the basis to an axis of pins, mm 680
Diameter of pins, mm 25
Type of the AIU 80V2U2,5 electric motor
Execution of JM4481 (flange)
Power, kW 2,2
Rotating speed, rpm 3000
Tension, B 660
Conditions of application of a pusher:
Air temperature, °C from-5 to +35
Relative humidity, % 100
Dust content of the environment, mg/g till 1000
Vibration of places of fastening, Hz 45... 120
Contact the seller
EKT 300-250 pusher