10 years on Allbiz
- Country of manufactureRussia
Drum drobemetny 42236
Drobemetny reel 42236 of production Amurlitmash of 1989. Release
This drum of skadsky storage in work was not, all knots and units new
St-t: 2 500 000 UAH including VAT 20%
PURPOSE OF THE DRUM
The drum drobemetny conveyor periodic action of model 42236 is intended for cleaning of steel and pig-iron castings of a prigar with simultaneous knockout of cores, and also for cleaning of a forging of stampings of scale at a temperature of the cleared details not svyshe70 a hail. Page.
STRUCTURE AND FEATURES OF THE DESIGN
The drum drobometny model 42236 consists of the following main knots:
1. The CHAMBER representing the combined and welded design limiting a working zone of cleaning and being the bearing design on which knots and mechanisms of a drum are located.
The back wall of a chamber is executed in the form of a double-wing door with an eccentric lock.
Existence of a door provides convenience and safe access to the lamellar conveyor for service and repair. A chamber ceiling removable that is convenient for the production of installation and dismantle of the tape conveyor and other elements of a design of a drum located in a chamber. The loading and unloading aperture of a chamber located in its forward part is closed by a door of telescopic type. In the top situation the door is fixed by an emphasis, than safety of works in a zone of a loading and unloading aperture is ensured. In a chamber face disks and the elastic conveyor providing a galtovka of the cleared details in the course of drobemetny processing are mounted. An internal surface of a chamber in a working zone and face disks are protected by wearproof metal protection against direct influence of fraction that increases drum service life. Bearing knots of shaft of the lamellar conveyor are located from the outer side of walls of a chamber and have free and safe access for their service. For adjustment of face disks the possibility of their axial movement is provided, and for regulation of degree of a tension of the conveyor on walls the cameras are mounted tension screw devices.
2. The LOADER intended for the dosed loading of the cleared details on the elastic tape conveyor in a working zone of drobemetny processing.
3. The DROBEMETNY DEVICE intended for emission on the cleared products of a stream of fraction of high kinetic energy. The Drobemetny device is located on a chamber ceiling so that the effective part of a torch of fraction is completely used on cleaning of a package of products, galtuyemy on the lamellar conveyor.
4. The DROBEOBRASHCHENIYA SYSTEM intended for collecting, separation and return on a reuse of the fulfilled fraction.
5. PLATFORMS OF SERVICE
6. ELECTRIC EQUIPMENTS
Control of the reel is exercised only from the panel located on automatic equipment case doors. The design of a drum and its kinematic scheme are simple that it significantly facilitates operation and repair.
Similar company products