- Country of manufactureRussia
- Дождевальная машина ДКШ-64 Волжанка
We make new with a guarantee.
It is intended for watering of undersized cultures, herbs, meadows and pastures. The Dozhdevalny car — position action, works from the closed irrigating network in which water is pumped by the pump station.
The main parts of the car — dozhdevalny covered two, located on both sides of the feeding pipeline.
The wing is collected from 12 pipes sections leaning on 34 wheels. The pipeline of each wheel represents the shaft transferring the rotating moment from the engine.
The internal combustion engine is installed on the special driving cart consisting of a frame 1, two wheels 2, a reducer 4 and chain transfer 3. The direct and return movement of the pipeline happens from a reverse reducer, the switching having the coupling.
Dozhdevalny devices of 28 pieces are installed on special mechanisms of self-installation of 28 pieces. They have the struts with freight keeping vertical position of a strut with the dozhdevalny device at any arrangement of the pipeline. The water stream at the exit strikes in the shovel of a yoke established at an angle and turns the dozhdevalny device on a corner 3... 5 °. The device comes back to a starting position under the influence of the twisted spring.
Working process following. A telescopic pipe the wing of the car is attached to a hydrant of the distributive pipeline and open a hydrant latch. Under the influence of the water coming to the water carrying out wing belt, drain valves are closed and dozhdevalny devices get into gear. After delivery of irrigation norm the latch of a hydrant is closed and the wing is otjedinyat from a hydrant. With reduction of pressure below 0,07 MPas drain valves 10 automatically open and water spontaneously merges from pipelines. Then include the necessary direction of the movement, start the engine and transfer a wing to the following position. Overhead irrigation duration on one position depends on norm of watering.
Dozhdevatel of "Volzhank" can work with a gidropodkormshchik for simultaneous introduction of mineral fertilizers.
Water supply of 32 p/a. Intensity of overhead irrigation with overlapping of 0,275 mm/min. Width of capture is 400 m. Distance between polices of 18 m. Movement speed between positions from 6 to 9 m/min.
Width of capture is from 150-800 meters. The price is given from 300 meter to 800 meter