Compressor ABAC 6000 </ span>
</ Td> </ Tr> </ Table>
Mobile metering range of the DC-54 (mobile) is installed on a hard, flat ground, making the foundation and skip pit is not required </ span> </. p>
The loading height of the bins of 5.1 meters, width of load over 3 meters </ span> </ p>
.
Three hopper mounted on a special frame, the volume of each silo 18 cub. meters. At each bunker installed two sector gates Camozzi (Italy) and vibrators-shaker OLI (Italy) 6 pieces. </ Span> </ p>
In order to ensure operability of the dosing complex it must be connected to a compressed air line with an operating pressure of 0.6 ... 0.8 MPa </ span>. </ p>
The conveyor is inert under the hopper 4 load cells «Cas» (South Korea), the total weight of the weighing 8 tons </ span> </ p>.
Control panel metering complex is set in a convenient location for the operator. (Optional) The inert (sand, gravel, crushed stone, etc.) are fed into the hopper by means of hoisting mechanisms, such as wheel loader. </ Span> </ p>
For protection from falling into the hopper major fraction into the hopper optional can be fitted lattice with the cell of any size </ span> </ p. >
Then all the work carried out by the remote operator metering complex (available metering complex with automatic remote control of PA management, for controlling the dosing complex in automatic mode) . With switches of the first shutter opens the main hopper and fed dose of the first component. The exact subsidy is carried out by pressing and impulse-open throttle. For the set of the required dose of the operator monitors the digital display board, which is located on the remote control. </ Span> </ p>
When a glitch in the supply of inert from the bunkers, the operator by pressing the button, activates the vibrators, shakers «OLI» (Italy) at the appropriate bin. As the dose set and weighting operator includes conveyor drive and weighted dose inert fed into a hopper. </ Span> </ p>
Next, in the same sequence the infeed and weighing the next component from the second hopper. After unloading, the conveyor of the dispenser-inert dosing cycle is repeated. </ Span> </ p>
The cycle of dosing up to 12 ... 20 seconds </ span> </ p>
. Also available in a protective coating of zinc. The coating is applied by cold galvanizing. </ Span> </ h4> </ div>
</ Span> </ span> </ div>
Installation Considerations </ span> </ div>
- It does not require the production of foundation and skip pit </ span> </ li>
- Three bunker to 18 cubic meters each (total 54 cubic meters.) </ span> </ li>
- Download a width of 3 meters, loading height of 5.1 meters </ span> </ li>
- Accurate dosing - an error of not more than ± 1% </ span> </ li>
- </ span> fettled drive drum, galvanized rollers </ li> </ Ul> </ div> </ div> </ div>
Installation Specifications </ span> </ h2>
- The total maximum amount of bunkers, the cube. m </ span> 54 </ span> </ li>
- . The volume of the hopper, the cube. m </ span> 18 </ span> </ span> </ li>
- . The number of bins, pieces . </ span> 3 </ span> </ span> </ li>
- Maximum weighing dose, kg </ span> 3000 </ span> </ span> </ li>
- batching error,% </ span> 1 </ span> </ span> </ li>
- belt speed, m \ c < / span> 1,6 </ span> </ span> </ li>
- The pressure in the pneumatic system, mPa </ span> 0,6 ... 0,8 </ span> </ span> </ li>
- < span> aggregate size, mm </ span> 70 </ span> </ span> </ li>
- < span> supply voltage, V \ Hz </ span> 380 \ 50 </ span> </ span> </ li>
- Power installed kW </ span> 16,8 </ span > </ Span> </ li>
- The shutter sector, pneumatic cylinders control, pc </ span> 6 <. / span> </ span> </ li>
- Weight, kg </ span> 7500 </ span> </ span> </ li>
- Height mm </ span> 5105 </ span> < / span> </ li>
- Width </ span> 3200 </ span> </ span> </ li>
- Length mm </ span> 9056 </ span> </ li> </ Ul> </ div>
< img src = "https://zzbo.ru/wp-content/uploads/2016/09/DKM54.jpg" /> </ span>
</ div> </ div> </ div> </ div>
|