- Country of manufactureUkraine
- Productivity4000-6000 pcs/h
- Габаритные размеры2460х830x2340 мм
- Установленная мощность0.8 кВт
- Масса550 кг
- Производительность4000-6000 шт/ч
- Давление сжатого воздуха0.45-0.63 МРа
- Напряжение питания220/50 В/Гц
- Расход сжатого воздуха300 л/смена
THE DOSING N1 - ARP CAR
The dosing car is intended for automatic dispensing of liquid and pastelike products without firm inclusions in any cylindrical container with a diameter not less than 60 mm and with a diameter of mouth not less than 40 mm.
Volume dispensing is carried out by two ways, depending on a product:
- with immersion of the filling heads;
- without immersion.
Dosing installation is made of stainless steel.
Principle of work
On the conveyor 10 cans (or bottles) which number counts the special sensor approach the dosing heads. The otsekatel holds this container in a filling zone. At the time of deduction of cans from movement on the conveyor there is a filling by their product. After filling the filling heads rise, the otsekatel exempts a container from deduction and the capacities filled with a product are taken away from a filling zone by constantly moving conveyor.
Further the cycle of work is automatically repeated.
As drives of the dosing cylinders filling heads and an otsekatel the pneumatics of the SMS (Japan) and a motor - reducer of SITI (Italy) is used. The programmable OMRON controller (Japan) operates operation of the batcher.
We recommend to you to buy this equipment if you are engaged in production and packing of juice, mayonnaise, tomato sauces and pastes, marrow caviar, sunflower oil, dairy, etc. products.
The price of the dosing car is defined by characteristics of the dosed product and a container.