Desktop universal kleemazatelny GLUECOVER-1506 car

Description of goods

SERIAL VERSION OF THE CAR OF GLUECOVER FAMILY

"GlueCover - 1506 - MD". The desktop universal kleemazatelny car intended for preparation of materials for assembly of photobooks, albums, and also other production in soft and firm cover.

OPPORTUNITIES:
1. Gluing of paper, photos, cardboard
Gluing of binding covers, folders, vignettes, diplomas, CD and DVD паков to 340 mm.
2. Gluing of a cover of binding covers
Possibility of gluing of lengthy materials without loss of quality of a glue layer with a density from 80 to 400 gr. m2
3. Gluing of preparations of a cardboard for assembly of photo albums by butterfly method
The car allows to work together with assembly tables directly in the course of assembly of the photobook. Change - over during the alternate work the cardboard/photo is not required
4. Huge range of materials
The car allows to work with such materials as: paper, a cardboard, the laminated paper, photos, a binding cardboard, pvc, to kozh. za, bum. vinit, fabric, skin, a tree, metal, plexiglas, glass, etc.
5. Parameters of adjustments
Speed of a path is regulated (move): 15 m/min (30 - 40 A4 sheets/min. )
Consumption of glue (320 * 220): 2,7 gr. — 1 + 1
Thickness of a glue layer of min: 0,045 mm
Gap thickness min Raquel/reel: 0,05
Thickness of "failure" of a glue layer: 0,032
Thickness at which kleerasplav goes beyond edge of a cut at a block undercut (from): 0,21

TECHNICAL CHARACTERISTICS:

- Power consumption in the heating mode — 2,2 kW

— Power consumption in the cyclic mode — 1,3 kW
— Supply voltage — 220 V, 50 Hz
— The number of engines — 2
— Power of engines — 160 W
— The cooling system – compulsory air, two planimetric
— Number of heating groups and zones of heating – 2 + 1
— Range of temperatures of heating of a bathtub — 25 — 250 ˚ With
— Range of temperatures of heating of a shaft — 25 — 180 ˚ With
— Type of heating elements — Ceramic - metal, controlled by electronics
— The electrician — System of independent solid - state relays on each knot
— Electronics — Microprocessor block
— Indication – ZhK the Display Russified ON
— Adjustment of speed of a path, management – 10 speeds, enkoder with the function choice, an inclusion key
— Types of glues — termokleerasplava
— Type of adjustment of thickness of a glue layer — rakelny slot - hole, two planimetric
— Range of adjustment of thickness (mm) — 0,045 to 0,50
— A microregistration rakelya — the Step of adjustment of 9 mm, 49 zones.
— An adjustment step rakelya (on a limb) — 0,008
— Thickness of failure of a glue layer (less than) — 0,037
— Thickness (total) a glue layer at the guaranteed lack of an exit of glue for edge of a cut when undercutting the block by effort of pressing to 500 kgfs (it is less than) 0,21
— Linear elasticity (at a glue 0,15mm thickness) — 1,3 mm (for the recommended glue)
— System previously a glue warming up – the Independent GCM - SH - B module
— Time of fusion of 1 briquette for the GCM - SH module – 14 min. to start work, 27 min. full.
— An approximate consumption of glue on the A4 format on the one hand – 1,7 gr. (for the recommended glue)
— The volume of a glue bathtub – 4,1 l. (the recommended working – 2,5 (2 briquettes for 1250 gr. ))
— Warming up time from room temperature – 18 min. (for high speeds of 30 min. )
— Speed of gluing of A4 (sheet/min. ) – to 40
— The maximum height of material with the clamping drive – 90 mm
— The maximum height of material without clamping drive – it is not limited
— The minimum thickness of material – 80 gr. m2
— Overall dimensions (SHKHGKHV) — 795х560х280
— The weight, kg — 68 kg

PRODUCTIVITY:
Putting glue on a format 210 * 297 (A4/mines) — From 5 to 30 (recommended)
Putting glue on a format 210 * 297 (A4/mines) — From 30 to 70 (quickly)

ADVANTAGES OF "GLUECOVER"
Desktop execution

Use of a termokleerasplav with residual stickiness

Does not demand cleaning upon termination of work,

After drawing glue remains active during long term (till 30 days). The recommended and used Printellect of glue have very high adhesion

Fast start

After inclusion the equipment is ready to work after 20 min. warming up.