- BrandDSP Přerov
- Country of manufactureCzech Republic
Ladle dehydrators are intended for dehydration of sand - gravel mix. The dehydrator consists of a bathtub with a crest of a spillway, a portable wheel, the giving screw and the drive. The motor reducer with the frequency converter is a part of the drive. Dehydrators are issued performed by without the giving screw - the KD model or with the giving screw – the KD model Š.
Type |
Water volume in a bathtub |
Diameter of a wheel |
Wheel width |
Productivity |
Power |
Weight |
|
Cubic meter. |
mm |
mm |
m cube/hour |
kW |
tons |
||
Without screw |
KD 3000 - 20 |
6, 2 |
3000 |
700 |
32 |
3 |
6, 3 |
KD 3000 - 80 |
10 |
3000 |
900 |
128 |
5, 5 |
9, 2 |
|
KD 3000 - 100 |
11 |
3000 |
1400 |
160 |
5, 5 |
9, 7 |
|
KD 4000 - 150 |
21, 5 |
4000 |
1800 |
250 |
18, 5 |
18 |
|
With the screw |
KD Š 3000 - 80 |
12 |
3000 |
900 |
128 |
5, 5 |
10, 9 |
KD Š 3000 - 100 - U |
16 |
3000 |
1400 |
160 |
5, 5 |
14, 5 |
Main advantages of dehydrators:
• intensive catching of small particles of raw materials that is reached thanks to large volume of a bathtub, the screw and rather long crest of a spillway with a special profile, • front surfaces of ladles are equipped with a wearproof, plate, replaceable edge, and on sidewalls the replaceable armor is established. The bottom is formed by the easily replaced sieve, • systems of an extract with formation of depression in ladles are increased by product dehydration degree, • the adjustable lower armor of an unloading funnel guarantees the minimum volume of the return pro - rash of raw materials when unloading a ladle, • dehydrator wheel turns, and thereby and the volume of the caught small fraction can be regulated as necessary by means of the frequency converter, • the dehydrator of a semi - mobile design is equipped in the lower part with runners. Is established on the stamped platform and does not demand anchor fastening.