- BrandЛинтеЛ
- Country of manufactureRussia
Products: Cyclic loading apparatus Lintel ACN - 20 for quality control of geotextiles buy wholesale price from manufacturer in Russia
Implemented standards
- ODM 218.5.006
- GOST R 56336
- GOST 32490
Benefits:
- Cyclic loading apparatus ACN - 20 is designed for fully automatic preparation of a sample of geosynthetic material under the action of a cyclic load
- The device performs a given number of loading cycles (from 1 to 500 cycles) from 4.5 kPa to a given load (from 20 to 500 kPa). During loading, the average values of the maximum and minimum cycles are calculated, as well as the spread of these parameters over all cycles.
- The device is equipped with a receiver and a low - noise compressor with a noise level of less than 46 dB
- Result logging provides storage of up to 450 results and up to 250 load graphs in non - volatile memory
- The color display provides detailed information about the set conditions, the current load values during the test, as well as a graph of the loading of the sample
- Built - in energy saving function, allows the drive to be automatically shut down during long periods of inactivity
- Test results can be viewed and printed via RS - 232 serial port
- Automatic stop of the test with sound signal of the end of the test
- Complete self - diagnosis system with indication of the causes of malfunctions on the display
Specifications:
| Specifications | |
|---|---|
| Minimum sample load per cycle | from 4.5 to 5.5 kPa |
| Maximum load on the sample per cycle | from 490 to 510 kPa |
| Number of sample loading cycles | from 1 to 500 |
| Loading frequency | 1 Hz |
| Working stroke of the plate, not less | 50 mm |
| Accuracy characteristics | |
|---|---|
| Limit of permissible error of load measurement, in the range from 0.1 to 1 kN | ten % |
| Limit of permissible error of displacement measurement, in the range from 1 to 2 kN | ten % |
| Limit of permissible error of displacement measurement, in the range from 2 to 10 kN | 0.2 kN |
| Performance characteristics | |
|---|---|
| Power consumption, in loading mode |
no more than 400 W |
| Power consumption, In standby |
no more than 200 W |
| Power consumption, in power saving mode |
no more than 30 W |
| dimensions | 900х1100х760 (width x height x depth) |
| Machine weight, without accessories | no more than 130 kg |
| Weight of the apparatus, with accessories | no more than 145 kg |
| Ambient temperature | from 10 to 35 ° C |
| Relative humidity | no more than 80% |
| Supply voltage | 187 to 242 V |
| Power supply frequency | 49 to 51 Hz |
| Air consumption, no more | 91 l / min |
| Inlet pressure | from 6.5 to 16 atm. |
| Life time | 6 years, no more than 15,000 hours |
| Warranty period of operation | 1 year, no more than 2,500 hours |
| Security | |
|---|---|
| electrical safety | Grounding of non - current - carrying parts and compliance with protection class 0I in accordance with GOST R IEC 61140 - 2000 |
| Sound accompaniment | Sound signal at the end of the test, detection of a malfunction |
| Diagnostics and configuration | Built - in algorithms for self - diagnostics and settings, notifying users about the causes of malfunctions |
| Equipment | |
|---|---|
| Lintel ACN - 20 apparatus | 1 PC. |
| Sample preparation box | 1 PC. |
| Sealing plate 300 x 300 x 75 mm | 1 PC. |
| Crushed stone bottom layer compaction plate | 1 PC. |
| Crushed stone top layer compaction plate | 1 PC. |
| Gasket plate installation template | 1 PC. |
| Manual | 1 PC. |
| Passport | 1 PC. |
| Certification program and methodology | 1 PC. |
| Additionally (optional) | |
|---|---|
| Receiver vertical, passport | Accumulator for storing compressed air under pressure and for smoothing out air pressure differences |
| Compressor, passport | Designed to increase the pressure (compression) of air |
| LinteL Link data collection system | Software and hardware designed to collect and transfer test results from devices manufactured by JSC BSKB "Neftekhimavtomatika" to a personal computer via wireless communication |
| Laboratory information system Lintel LIS | Software and hardware designed for complex automation of laboratory activities |
Recommended Equipment for Qualification (not included in the delivery set)
The measuring instruments used for certification must pass state verification in accordance with GOST 8.513 - 84 and have a verification certificate (protocols, stamps) with an unexpired validity period.
The measuring instruments recommended1 for use in the certification of the apparatus are given in the table
| Name | Measurement limits | Accuracy class (error) | Appointment |
|---|---|---|---|
| Stopwatch SOPpr - 2a - 3 - 000 |
not less than 60 s | 1.6 s in 30 min | Time measurement |
| Dynamometer ADSDS - 1I - 2 | 0.1 . . . 1 kN | ± 0.45% | Force measurement |
| Dynamometer ADSDS - 10I - 2 | 1 . . . 10 kN | ± 0.45% | Force measurement |
1 Instead of the indicated measuring instruments, it is allowed to use other similar means that ensure the measurement of the corresponding parameters with the required accuracy.
Payment terms: 100% prepayment, partial payment is possible
Terms of delivery: EXW, other terms of delivery are also possible
Manufacturer: JSC BSKB Neftekhimavtomatika is one of the leading enterprises in Russia for the production and development of automatic devices for quality control of various types of products: fuels, oils, lubricants, bitumen and bitumen materials, catalysts, asphalt concrete, geotextile materials and others. The devices are manufactured under the LinteL trademark and implement test methods in accordance with: ASTM, EN, ISO, GOSTs of the Russian Federation and the CIS.
Manufactured products:
- Laboratory automation
- Quality control of GEOTEXTILE
- ASPHALT CONCRETE quality control
- BITUMEN QUALITY CONTROL
- Quality control LUBRICANTS
- FUEL quality control
- Quality control of CATALYSTS
- AUXILIARY EQUIPMENT
