- BrandМашпромоборудование
- Country of manufactureRussia
The crusher is molotkovy
Are used for crushing of medium-hard and fragile materials such as coal, chalk, plaster, furnace slag, brick and fire-resistant fight, limestone, marl, wood waste and others with an average hardness up to 7 units on Moos's scale, that is the maximum durability on compression of shredded materials should not exceed 150 kg / cм2. It is generally used for the cement, mining industry, enrichment of coal, sectors of chemical and construction materials.Principle of action
Working body of a crusher is the rotor which consists of a shaft, disks, expansion washers, hammers.
The product moves through a reception branch pipe in a cover. At rotation of a rotor hammers under the influence of centrifugal force are extended in the radial direction and with a force strike pieces of the material loaded into a crusher. Previously split pieces are poured on a grid-iron lattice. Fine grains, the size there is less opening in a lattice, fail through it, and larger are exposed to additional crushing by hammers - to blow and attrition. Attrition of materials hammers happens to the help of a small gap between end faces of hammers and a lattice. The product of the set fineness is provided by adjustment of a gap between the ends of hammers of a rotor, a crushing bar and grid-iron lattices.
Technical characteristics
Parameters |
Values |
Settlement productivity, t/h |
2,2-3,5 * |
Diameter of a rotor, mm |
460 |
Working length of a rotor, mm |
200 |
The entering dn fraction, mm |
70 * |
The leaving dk fraction, mm |
– 3 ¸ –5 * |
Frequency of rotation of a rotor, rpm |
1500 |
Electric motor: |
|
type |
4A132S4U3 |
power, kW |
7,5 |
speed, rpm |
1500 |
tension, In |
380 |
Mass of a crusher, kg |
577 |