Currency EUR
Crane sharovy coupling collapsible yat 10m.A.00.06.B – Yargazarmatura, OOO | all.biz
Buy Crane sharovy coupling collapsible yat 10m.A.00.06.B
Crane sharovy coupling collapsible yat 10m.A.00.06.B
kran_sharovyj_muftovyj_razbornyj_yagt_10ma0006b

Crane sharovy coupling collapsible yat 10m.A.00.06.B

Products from producer
In stock
Reconfirm the price with seller
Payment:
Shipping:
  • Customer pickup,
  • Courier,
  • Transport company
  • In detail
Seller
Russia, Chaykovskeey
(View map)
+7(3 
Display phones
Technical characteristics
  • BrandЯргазарматура
  • Country of manufactureRussia
Description

dn, mm 10
PN, 16 - 250 kgf / cm
T Working Environment * - 61 ° - + 200 ° L, mm 97
H, mm 49
B, mm 132
D, mm m20x1,5
D, mm 10
Mass no more, 1 kg
AG3 Benefits of Ball Cranes Yat

  • Long service life (capable of functioning without replacement up to 30 years), exceeding the service life.
  • Strength and ease of construction, anti - corrosion resistance.

    Crane ball brand YART does not need tightening and lubricant, withstands large axial pressure and will last long time for a long time;

    • High limiting temperature of the working medium - from - 61 ° C to + 200 ° C (brief).

      The temperature stability of the ball valve is at least 180 ° C. In turn, the temperature stability of the valve with a rubber seal is only 70 ° C, and the conical removal is 80 ° C.

      Despite the fact that the price of this product is lower than on ball valves, the costs of their installation and maintenance are significantly higher than similar costs for ball valves. In addition, the difference in the price of all these parts is insignificant. Thus, steel cranes are much more economical and more reliable.

      • minimum load on the pipeline

        Small (in comparison with bars) The weight parameters of the ball cranes of the YART provide the minimum load on the pipeline

        • differ in high speed overlap of the working environment.

          Crane has a plug - in stop limiters, which clearly fix its location relative to the axis of the pipeline in the positions "open" and "closed". When turning the lever on ninety degrees, opening or closing the stream of the medium occurs. In this case, you can visually determine, the crane is open or closed.

          As for other elements of shut - off reinforcement, many of them work on another principle: in order to open or stop supplying the substance, over ten full turns of the flywheel should be performed, such as, for example, at the valves

          • Maximum tightness (class of tightness "A" according to GOST 9544 - 93), which eliminates leaks for a long time.

            All cranes The balls of the balls are passing tests on the benches on the tightness of the air of RSPP 0.6 MPa at T + 20 ° C and for strength and density with water with a coefficient of 1.5 to nominal pressure (PN) (for example, for pn 16, 0 MPa - RPR 24.0 MPa).

            Low main costs, Ball cranes Yagt do not require maintenance.

            Due to its solid all - welded body and fluoroplastic seal, the ball valve does not require constant maintenance or replacement of spare parts.

            Therefore, there is no need to install steel ball valves, buy additional tools, spare parts or specially learning staff to work with such reinforcement. When using ball cranes, the yatte is practically no pressure loss in the pipeline (the hydraulic resistance coefficient is close to one), which allows you to save electricity in the drives of pumping and compressor units.

            • Optimal ratio Price - Quality.

              Price of valves, valves, needle valves, conical and cork cranes can be slightly lower than the price of the ball crane of the YART, but the cost of installation and maintenance is significantly higher than similar costs of the ball crane, which in combination with a high cost of repair allows you to conclude more Economic efficiency of using a ball crane Yagt.

              • simplicity design, installation.

                Feature The design of steel ball cranes is such that its main part with a plug does not have bolted connectors, because of which the leakage of a substance caused by the dynamic load of the pipeline could occur. Ball steel taps of the YART, are made of the highest quality metals and alloys.

                The main part of the ball crane consists of a central welded spherical part with a plug inside. The spherical part of the parts such as steel taps does not have bolted connectors and has minimal wall thickness and weight. In this case, the spherical part can withstand the maximum load and high pressure.

                • Crane ball can be installed in any position, i. e. the flow of the working medium is possible in both directions;
                • Increased traumatic handle safety;
                • Anticorrosive spraying on the handle and electroplating of the lock nut.
                • Full - increment of ball valves provides the possibility of passing through it of cleaning and diagnostic devices.

                  Ball cranes Yagt have been produced for more than 15 years, during this time the company's products Ltd. " Yargazarmatura " Well established itself in the Russian market.

Contact the seller
Crane sharovy coupling collapsible yat 10m.A.00.06.B
Crane sharovy coupling collapsible yat 10m.A.00.06.B
Shipping method
Payment method
Compare0
ClearSelected items: 0