Coppers are household wall

HOUSEHOLD GAS COPPERS OF HEATING OF INDUSTRIAL FUNCTION
The increased demand for industrial and household gas coppers of heating is rather high. They are very popular, especially owing to their profitability that is especially important for continuous increase in prices for energy carriers.

The coppers using gas perfectly heat both households, and industrial facilities. They at the same time can warm both heat carriers, and rooms. By means of gas coppers there is a heating and intake of hot water. Coppers of heating are subdivided into industrial and household gas coppers of heating. Industrial gas coppers consume gas more intensively and develop thermal energy. Unlike household coppers, they have more difficult device. Thanks to the features of the device of industrial coppers they is more practical fulfill gas fuel.

Also electric boilers household for heating are used. However electricity – expensive pleasure. Therefore electrode coppers of heating household are applied as reserve option or if there is no gas.

MISSION AND WORK OF GAS COPPERS

Industrial gas coppers of heating, concentrating the large volume of the thermal energy which is able to heat both the bigger volume of water, and more extensive rooms. Natural gas is considered the most inexpensive fuel resource on the basis of which burning heat is formed. Gas industrial coppers – a source of heating of administrative cases and municipal services.

Gas coppers for the industry, as well as household coppers of heating, having approximately similar device, equally also function.
The device includes a gas torch, the copper heat exchanger. The torch carries out water heating, the heat exchanger promotes transportation of the heat carrier.

Purpose of industrial household gas coppers of heating
1. Mission of devices
2. Efficiency level
3. Device of an industrial copper
4. Classification of gas coppers
4.1. One-planimetric
4.2. Double-circuit
4.3. Wall
4.4. Floor
5. Security measures

Mission
Gas coppers – the most low expensive option of obtaining thermal energy. They are used on industrial facilities, and also in life. Though purpose of gas coppers in both cases is identical – heating of rooms and heating of water, requirements to productivity at industrial coppers are much higher.
Besides, sometimes on production also supply of steam on the equipment is required. Therefore
industrial gas coppers have more difficult device in comparison with household and
their size happens very considerable. Thanks to it they are more economic in operation.
Household gas coppers have the small sizes, are simpler in the device and service.
They perfectly heat rooms and heat water for domestic needs. Along with gas coppers in life also electric coppers are used. They are usually used in those points where natural gas is not brought yet. Electric coppers in comparison with gas make much more expensive thermal energy.
Efficiency level
Industrial gas coppers are the powerful heating devices having the big sizes and high efficiency of thermal energy. They are established in special rooms in which observance of safety measures of operation of such heating equipment is possible. The coppers using gas are rather simple in service, the efficiency level very high. Operability of coppers, is usually automated also safety of operation of very high, nearly 100%. Coppers can be water-heating and paroobrazuyushchy.

Copper device.

The copper device for heating of production rooms rather simple, is the boiler room equipped with a powerful gas torch, the heat exchanger, pumps for water, fumes disposal groups and various measuring equipment for measurements of temperature and pressure. Water in heat exchangers heats up under big pressure, and moves a direct flow.
The internal device the Modern heating and water-heating equipment, household gas coppers of heating of industrial function are often arranged so that for heating in them it is possible to use different types of fuel. Except gas, it is possible to apply liquid and solid fuel.
Regulators which equipped such coppers automatically transfer the equipment to other type of fuel. The community of a structure of industrial coppers concerns their main purpose production of thermal energy. Distinctions in a design are caused by a number of additional tasks which are set for the producer by the consumer. It can concern power, productivity, profitability.

Coppers happen one-planimetric and double-circuit.
Oldnokonturny
Heat the room, double-circuit – both heating, and production of hot water for domestic and industrial needs. The device of a one-planimetric copper is simple – the heat carrier of heating is carried to the necessary temperature in the heat exchanger and goes to system of heating where heats the room.
Double-circuit
The double-circuit copper has two contours of the heat exchanger. When the heating system works
rooms, the heat carrier does not get to the second contour. For this purpose there are special
adjusting valves. When these valves open, the heat carrier ceases to come to system of heating, and comes to the second contour where water heats up the heat carrier of the first contour and then comes to the crane. When stop using hot water, valves are closed and the heat carrier goes for heating of the room again. In double-circuit coppers can will be added with boilers, and then hot water will constantly arrive.

Household gas coppers of industrial function are divided into two modifications – hinged and stationary.
Wall coppers are universal, have the small sizes, beautiful design, the low price.
It is in fact a mini-boiler room which remains compact and work almost independently. In one case are collected: a gas torch, the heat exchanger from copper or steel, pumps, a set of necessary sensors, the fan which is taking away combustion products in ventilating system.
Floor coppers with the combustion chamber from cast iron are more durable and reliable in work. It
the equipment complete with the boiler will provide the necessary amount of hot water, and comfortable temperature in the dwelling.

Security measures
In spite of the fact that the device and work gas coppers have high safety, it is necessary to monitor strictly the correct operation of the equipment and it is good to know actions at emergence of emergencies. It can be excess of pressure, energy shutdown, natural disasters.
Responsibility for safe work of a gas copper is born by the executive who
directs work on this site and to whom the service personnel submit. He is obliged
to provide the safe mode of gas supply, the maintenance of the equipment of a boiler room in good shape, to allow to work only the trained people.
Modern models of coppers are equipped with automatic security systems.
Thermostats prevent a water overheat, regulators maintain the necessary intensity of a flame, there is also a device which is not allowing a scum on internal details of a copper. Such equipment raises the copper price, but safety in work is the most important.

Advantages of use of gas coppers are indisputable:

Compactness and low cost of the equipment
2 The most inexpensive for today a power source – natural gas.
3 High safety in work.
4 The combustion products coming to the atmosphere are less toxic in comparison
products of combustion of liquid and solid fuel.
5 High efficiency.