- Country of manufactureUkraine
Area of heating: to 150 sq.m.
Power - 18 kW.
Efficiency at the rated power - 91,1%.
Gas Q consumption: from 0,75 CBM/hour - to 1,98 CBM/hour
Range of regulation of t of water in a heating contour - from 30 to 77º C, in a contour of hot water supply - from 30 to 60º C. A water consumption at t 35º C - 6,5 l. / min.
Width x Height x Depth: 360х700х315 mm.
Appointment: autonomous heating and hot water supply of apartments in apartment houses, private houses and offices.
Functions and features:
Soft start of a copper at start - smooth giving of pressure of gas upon a torch without cottons and a bakhkanye.
Function not of freezing (No frost) - if temperature in system of heating falls to 5º C, the control unit turns on the pump in the heating mode.
Function of anti-blocking of the pump (protection against a souring) - if the copper is switched off, the pump automatically turns on for 10 seconds each 22 hours.
The gas valve (SIT, Italy) blocks supply of gas in all emergency cases.
Heat exchanger (VALMEX, Italy).
Torch (POLIDORO, Italy). Lack of an ignition torch allows to save a gas consumption.
The hydroblock (OTMA, Italy) rationally brings and distributes water flows.
The pump (WILO, Germany) with automatic system of protection against blocking (souring).
The block of electronic control (NORDGAS, Italy) exercises automatic control of a copper and controls its work.
Temperature sensors (NORDGAS, Italy).
In all coppers of Teplowest CLASSIC the unified electronic payment which provides additional benefits and conveniences at guarantee and service is used.
On all models the possibility of connection of the thermostat and timer, and also sensor of external temperature is provided. The electronic payment allows to connect the portable control panel. All information on work of a copper is output to the LCD display.
Coppers of Teplowest CLASSIC are specially ready for work in the conditions of Ukraine and the CIS countries, can work with systems of low-temperature heating of a floor.