- BrandОАО \\\"Челябинский механический завод\\\"
- Country of manufactureRussia
- Type of partOriginal
- материалсталь
- Высота, мм590
- Ширина, мм690
- Длина, мм1200
- вес, кг21
COP-45721M.95.20.000 tank Chelyabinets crane KS-45721, CS-55732, KS-55733A, KS-65711, CS-65717.
Oil tank Since the capacity of the hydraulic system of the crane is changed during operation, to compensate for its volume serves as an oil tank. The working fluid is partially cooled in the tank settles heavy impurities from entering the system and of the working fluid is released air bubbles which could adversely affect the operation of the hydraulic system. The tank is mounted on the crane frame. A working fluid is an outdoor faucet gets to the pumps. The crane also serves to prevent discharge of working fluid from the tank when disconnecting the suction hoses or malfunctions. To check the oil level in the tank has oil gauge and sight glass. The normal fluid level in the tank in the transport position of the crane must be within the sight glass or marks on the dipstick. Filling the tank is made through the neck, where the strainer is installed. Bay working fluid is not allowed without a filter. Draining the working fluid from the tank and connecting the manual pump through a valve at its screwing. To clear the working fluid from the mechanical impurities that result from normal wear and tear of parts, in a tank mounted return filter MPF4002AG3P25NB, in which the filter element is installed. On the cover of the drain filter is provided with an opening (blind plug) to install a pressure gauge (spare parts kit). When the pressure gauge readings greater than 0.25 MPa (2.5 kgf / cm2), the filter element must be replaced. To control the degree of contamination of the filter: - Remove the cover; - Mount the gauge. When the filter is clogged triggered the overflow valve, which is set to the pressure of 0.25 MPa (2.5 + 1 kg / cm2). To replace the filter when the TO-2 is necessary to unscrew the screws and remove the cover.
1 - tank; 2 - oil gauge; 3 - filter drain; 4 - filler neck with a strainer; 5 - viewing window; 6 - shut-off valve; 7 - overflow valve
Install the oil tank (COP-45721.95.00.000-03)
designation Designation |
Max. on Sat. unit Quantity per unit |
Weight, kg Mass |
Name |
Name |
COP-45721.95.30.000 |
2 |
0.21 |
yoke |
Clip |
COP-45721.95.00.002 |
4 |
0.03 |
gasket |
Gasket |
COP-45721.95.20.000 |
1 |
89 |
oil tank |
Oil tank |
COP-45721.95.10.000 |
1 |
9,654 |
Bracket |
Bracket |
COP-45721.95.00.001 |
1 |
1.1 |
lath |
Strap |
COP-45721.95.10.000-01 |
1 |
9,654 |
Bracket |
Bracket |
COP-45721.95.00.004 |
1 |
0.09 |
Nut |
Nut |
COP-45721.95.00.005 |
1 |
0,022 |
union |
Union |
YAN.11.01.003 |
1 |
0.01 |
Copper Washer d5 × d10 × 2 |
Washer |
|
1 |
|
Gauge MTP-4M-2,5MPa-4 TU 25-7310.0045-87 |
Manometer |
COP-55730.95.001 |
1 |
0.29 |
housing |
Casing |
Oil tank (COP-45721.95.20.000)
designation Designation |
Max. on Sat. unit Quantity per unit |
Weight, kg Mass |
Name |
Name |
|
24 |
|
Washer 8.65G.019 GOST 6402-70 |
Washer |
|
8 |
|
Nut M8-6N.5.019 GOST 5915-70 |
Nut |
|
16 |
|
M8-6g Bolt × 30.58.019 GOST 7796-70 |
Bolt |
|
3 |
|
Ring 185-195-46-2-2 GOST 18829-73 / GOST 9833-73 |
Ring |
COP-55730.95.20.800 |
1 |
10.65 |
housing |
Casing |
COP-45721.95.20.1000 |
1 |
0.2 |
oil gauge |
Oil indicator |
COP-45721.92.20.600 |
1 |
1.6819 |
overflow valve |
Bleed-type pilot valve |
|
1 |
|
Ring 070-075-30-2-2 GOST 18829-73 / GOST 9833-73 |
Ring |
COP-45721.95.11.000 |
1 |
7.33 |
Stopcocks |
Stopcock |
|
8 |
|
M8-6g Bolt × 25.58.019 GOST 7796-70 |
Bolt |
COP-45721.95.20.015 |
1 |
0.07 |
cap |
Cork |
COP-4572.83.302 |
1 |
0.32 |
Valve |
Valve |
|
1 |
|
Ring 025-030-30-2-2 GOST 18829-73 / GOST 9833-73 |
Ring |
|
1 |
|
Cork 01483SP (magnetic) |
Plug |
|
1 |
|
Ring 40927SP (copper and asbestos) |
Ring |
COP-45721.95.20.500 |
1 |
58.8 |
Tank |
Tank |
631.20.01.060 |
3 |
0.02 |
bracket |
Clamp |
|
1 |
|
Ring 055-060-30-2-2 GOST 18829-73 / GOST 9833-73 |
Ring |
COP-45721.95.20.013 |
1 |
0.05 |
Glass |
Glass |
COP-45721.95.20.012 |
1 |
0.15 |
Washer |
Washer |
|
6 |
|
Washer 5.65G.019 GOST 6402-70 |
Washer |
|
6 |
|
V.M5-6g screw 10.58.019 * GOST 17473-80 |
Screw |
COP-45721.95.20.200 |
1 |
0,116 |
Filter |
Filter |
COP-45721.95.20.002 |
2 |
0,016 |
Ring spring |
Spring ring |
COP-45721.95.20.001 |
1 |
0.13 |
Lattice |
Grating |
COP-45721.95.20.014 |
10 |
0.01 |
Grid |
Wire netting |
|
0.3 m |
|
1 Wire-O-CH GOST 3282-74 |
Wire |
|
2 |
|
Leaden seals d10 TU 172.532-002-491-389-68-04 |
Lead sealing |
COP-45721.95.20.100 |
1 |
1.52 |
Cap |
Cover |
COP-55730.95.20.700 |
1 |
4.14 |
Cap |
Cover |
COP-45721.95.20.010 |
1 |
0.08 |
Sleeve |
Bushing |
COP-45721.95.20.009 |
4 |
0.05 |
Sleeve rubber |
Bushing |
|
2 |
|
Element filter "Regotmas" TU 661-1-05 3689-003-26361511-94 |
Filter cartridge |
COP-45721.95.20.005 |
1 |
0.14 |
Diaphragm |
Plate |
COP-45721.95.20.008 |
1 |
0.05 |
Sleeve |
Bushing |
COP-45721.95.20.900 |
1 |
0.208 |
The diaphragm assembly |
Plate assy |
COP-45721.95.20.007 |
1 |
0.4 |
Spring |
Spring |
COP-55730.95.20.006 |
1 |
2.48 |
Washer |
Washer |