Currency EUR
Control unit of spherical cranes (BUK-3) of the trade and main gas pipelines – PAO NPP Teploavtomat | all.biz
Buy Control unit of spherical cranes (BUK-3) of the trade and main gas pipelines
Control unit of spherical cranes (BUK-3) of the trade and main gas pipelines
blok_upravleniya_sharovymi_kranami_buk_3

Control unit of spherical cranes (BUK-3) of the trade and main gas pipelines

Products from producer
In stock
Reconfirm the price with seller
Shipping:
Seller
Ukraine, Kharkov
(View map)
+380 
Display phones
Technical characteristics
  • BrandТеплоавтомат
  • Country of manufactureUkraine
  • Рабочая среданеагрессивный природный газ или сжатый воздух
  • Давление рабочей среды МПаминимальное - 0,6 (6,0), максимальное - 16,0 (160,0)
  • Массане более 9,8 кг
  • Электрическая мощностьне более 20 Вт
Description

Control unit of cranes (BUK-3)

The control unit of cranes (BUK-3), productions of PAO "NPP TEPLOAVTOMAT", is intended for remote or local (manual) control of pneumatic or pneumatichydraulic drives of on-off pipeline fittings (in particular by the DU spherical cranes from 250 to 1400 mm), locks disk and other rotary devices. Blocks have collaboration potential with alarm system devices about final provisions of locking body of the crane "is open" or "closed"

Application

Trade and main gas pipelines, systems of arrangement of compressor and gas-distributing stations, collection points and preparation of gas, gas storage.

Operation of BUK-3 is provided at an air temperature from - 60 °C to + 55 °C. Relative humidity of 100% at a temperature + 25 °C. Technical characteristics

- Working environment: the nonaggressive natural gas or compressed air purified and drained
- Pressure of a working environment of MPa (kgf/cm2):
- minimum - 0,6 (6,0);
- maximum - 16,0 (160,0).
- The consumed electric power: no more than 20 W.
- Electromagnet operating mode: long (PV of 100%).
- The operating signal: remote - electric a direct current of 24 V, 110 V or 220 V or manual (local), effort no more than 30H (3 kgfs).
- Output signal: pneumatic discrete, corresponding to pressure of a working environment.
- Weight: no more than 9,8 kg.

ae/eu

Crane Control Unit (CCU-3), (produced by the PJSC "Scientific-Production Enterprise "Teploautomat") is designed for remote and local (manual) of control of pneumatic or pneumohydraulic actuators of bi-directional pipeline valves (especially of ball valves DN 250-1400 mm), butterfly valves and other tilting units. Units are capable of work with the devices of signaling at the end positions of the shut-off cock "open" or "closed"

USE

Gas mains, equipment systems for gas-distributing and compressor stations, gas collecting main, gas storage

CCU-3 operation is under such climate conditions possible: temperature from minus 60 °C to plus 55 °C, relative humidity of of 100% at +25 °C. SPECIFICATIONS

- Working environment: non-aggressive natural gas or compressed air, purified and dried.
- Fluid pressure MPa (kgf/cm2):
- min - 0,6 (6,0);
- max - 16.0 (160).
- Power consumption - no more than 20 watts.
- Operating mode of the electromagnet: long (100% of duty cycle).
- Control signal: remote-electrical DC voltage of 24, 110 or 220 or the manual (local), force not more than 30 N (3 kgf).
- Output: pneumatic, discrete, equal to the working environment pressure
- Weight: not more than 9,8 kg.

Contact the seller
Control unit of spherical cranes (BUK-3) of the trade and main gas pipelines
Control unit of spherical cranes (BUK-3) of the trade and main gas pipelines
Shipping method
Compare0
ClearSelected items: 0