Compressor KVV 0,6 / 10

Designed to supply compressed air to pneumatic tools, devices, mechanisms and various industrial facilities.

Screw compressors are highly reliable and durable due to the absence of valves and reciprocating parts, as well as the use of highly reliable asynchronous motors.

 

Options	Data
	KVV 0,6 / 10
Productivity, m³ / min, at 1MPa	0.6
Compressed air pressure at the compressor outlet, max, MPa	1
Electric motor power, kW	7.5
Protection degree of electrical equipment	IP20C
Receiver volume, l.	270 / -
The amount of oil, l.	6
Oil content in compressed air, at the compressor outlet, mg / m³	3
Overall dimensions, mm
length	1650/1300
width	700/560
height	1200/820
Weight, kg	260/110
Additionally, the compressor can be equipped with the following devices
Air preparation device - filter regulator with pressure gauge and semi - automatic condensate drain
Air handling unit + automatic condensate drain
Air dehumidifier up to class 0 (dew point reduction by 15 °)
Compressed air dryer with 40 ° dew point reduction (Additional drying of the filter element cartridge is required)
Drying device with regeneration of the silikogel cartridge of the filter element (dew point reduction by 40 °)

Compressors with a frequency converter that changes the angular speed of rotation of the screw block in proportion to the actual consumption of the consumer network at a given pressure at the outlet of the compressor, allows you to save up to 6% of electricity with an increase in the value of the outlet pressure for every 0.1 MPa

Screw compressors are highly reliable and durable due to the absence of valves and reciprocating parts, as well as the use of highly reliable asynchronous motors. The uniform supply of compressed air eliminates the need for air collectors, the complete balance of the rotors eliminates the need for special foundations, therefore the compressor is installed on a site that takes loads only from its own weight. Compressor stations consist of a screw compressor, an electric drive, an oil separator and an automation system. The system of smooth adjustment of productivity and the presence of perfect automation allows to achieve significant energy savings and minimize operator labor. All compressors are thoroughly tested before being sent to the customer.