Cold plastic for a road marking of B-AK-501-T HOLDPLAST

• Plasticity of cold drawing B-AK-501-T HOLDPLAST of STB1520-2008 two component structure on the basis of methylmethacrylate, (100:2).
• Does not contain organic solvents.
• Hardening of plastic on a roadbed results from course of chemical reaction of polymerization.
• As a filler it is used kristobalit which has bright, white color. As a result of it the marking does not grow dull in process of wear that favorably affects traffic safety.
• Is issued in two options:-with glass balls and without them.
• According to statistical data of foreign countries marking service life from cold plastic is approximately twice more than from hot, the same thickness, and makes not less than 5 years for thickness of 3 mm.

• Marking of roads, parking zones and platforms, playgrounds, airfields, with an asphalt concrete and cement-concrete covering
• Marking of city streets with the most heavy traffic, generally: crosswalks, feet of lines, road signs, arrows.

• Excellent operational properties that promotes traffic safety.
• Fast drying, the movement is possible in 30 min.
• Frost resistance, resistance to influence of water, water solution of chloride of sodium, and automobile fuel.
• High adhesion both to asphalt concrete, and to a cement-concrete paving.
• Is issued in four flowers: white, yellow, orange, black.

• To store in the original, well closed packing, in dry rooms, far from heating devices.
• Not to allow hit of direct sunshine.
• To hold far away from children
• Warranty period of storage of 6 months from the date of release.

• The marking should be put in dry weather on dry, cleared of dirt and dust, to a paving, at the established air temperature from 5 °C to 30 °C. It is not recommended to arrange a constant marking on newly-laid pavings before 1 month after their device. At the open movement and intensity of the movement more than 3000 buses/days the device of a constant marking in 1 week is allowed.
• Depending on a type of razmetochny equipment cold plastic it is possible to make a structural, profile or continuous marking. An average consumption of plastic — 6,0 kg/m ² (thickness of the created layer of 3,0 mm).
• Driving of transport through razmetochny lines is allowed not earlier than 45 min. after their drawing.

• Plasticity of cold drawing B-AK-501-T HOLDPLAST it is classified as the irritating and flammable product.
• At works to observe measures of fire safety and personal hygiene.

The data provided in this description correspond to time of its edition. Technical characteristics of material, its complete set, and the descriptions provided here can change the producer without preliminary announcement. For obtaining actual information address the producer