The split pressurized solar water heater composes of heat pipe solar collector, storage water tank, workstation system, accessories and interconnecting
pieces.
Working principle:
1. The collector absorbs solar energy and transmits it to the water tank through circulation.
2. When the temperature of the collector reaches the set value, the controller starts the circulation pump automatically.
3. The circulation pump makes heat-conducting liquid circulate automatically.
4. The heat-conducting liquid transfers heat to water by lower heat exchanger in the water tank.
5. When the temperature difference between solar collector and tank doesn't reach the set value, the circulation pump will be shut automatically.
6. In case the temperature of the water tank does not reach the max, Electric Heating Element will start to work automatically.
Features:
1. Collectors are separated from the storage tank. The tank can be put anywhere of the house and the collector can be put on both tilted roof and flat roof ,so the whole system is harmonious with the building
2. Use heat pipe for the heat conduction and can get a high heat absorption efficiency and rapid heat transfer
3. No worry about being frozen because there is no water running inside the tubes when working
4. Intelligent control and automatic operation
5. It can withstand pressure of tap water when it works
6. Without incrusting, long usage life
7. Multifunction: Bathing, washing, domestic heating
8. One or several glass tubes broken will not fluence system work
9. Tubes can be laid for long time under the sun without water in the tank.
10.match with intelligence controller and assistant electrical heater, the system can provide hot water to you anytime.
Specification:
Heat Pipe Solar Collector |
Spec. (mm) | Φ 47× 1500 Φ47× 1800
Φ 58× 1800 Φ 58× 2100 |
Tube (pcs) | 15 / 20 / 25 / 30 / 35/ 40 | |
Vacuum Tube | 3.3 Borosilicate glass, red copper heat pipe, aluminum fin | |
Manifold | Copper flow passage, PU insulation, Aluminium alloy shell | |
Water Tank |
Capacity | 100 ~ 500L |
Inner Tank | Food-grade stainless steel SUS304-2B 1.2-2.0mm | |
Copper coil | High-quality red copper coil
Φ 12X1.0mm |
|
Insulation | Improved polyurethane integrated foaming with thickness 60mm | |
OuterTank | Color steel 0.35-0.5mm | |
Collector Bracket | Spec. (mm) | 1.5 ~ 2.0mm in thickness |
Material | Aluminium alloy | |
Accessories | Workstation system, Electric heater, dustproof ring Reliefvalve,Anodemagnesium bar, T/P valve | |
Working Pressure | ≥ 6 Bar | |
Hail Resistance | Φ 25mm |