MARSIDE Series
Product Name/Model：MSK-6000 Extra Fast Clear Coat.
Characteristic: Extra fast drying clear coate, high gloss and hardness, easy application, low consumption and high efficiency to ensure good profit, suitable for fast spots repair.
|
Substrates |
1K Basecoat. |
||||
|
Mixing Ratio |
Clear Coat |
Hardener |
Thinner |
||
|
2 |
1 |
0.1~0.3 |
|||
|
＜25℃ |
6000 Extra Fast Drying Clear Coat |
802 Extra Fast Dry Hardener |
90 Fast Thinner |
||
|
Spray Viscosity |
14-16s to drop off, in 4# viscosity cup at 25°C, |
||||
|
Pot-Life |
At 25°C, 1.5 hour. |
||||
|
ReTreatment |
There are particles or runs after spray, sand affected area with P2000 sand paper |
||||
|
Spray Gun Set Up |
Gravity Feed: 1.2-1.5mm 4-5kg/cm² |
||||
|
Spray Technology |
Coats&Thickness: 2-3 coats, total 25-35um |
||||
|
Drying Time |
Temperature |
Dust Free |
Tack Free |
Tack Free |
Dry to Test |
|
25°C |
15 minutes |
2 hours |
4 hours |
5 days |
|
|
70°C |
3 minutes |
10 minutes |
15 minutes |
45 minutes |
|
|
Shelf Life |
2 years in original sealed can, cool and dry place at 20℃. |
||||
|
Package |
5L×4 or 2.5L×8 or 5L+2.5L+1L |
Note:
1. This products are extra fast reaction, after mixing clear coat with hardener, just add small quantity of thinner for spraying, the mixture should be used up within 1 hour.
2. The spray viscosity could not be too high, in case of paints defects, such as orange skin.
3. This product is suitable for spots repairs, not suitable for overall repair.
4. At temperature lower than 8°C, a forced dry by baking is recommended.
5. It is recommended to apply at conditions of temperature lower than 25°C and humidity lower than 80%, otherwise there will be defects such as blistering or blushing.
6. The products mixed with hardener should be used up soon and can not be restore for future
use; clean equipments immediately with thinner after application, otherwise it is very difficult to be cleaned after dry.