汉语
货币 CNY
Continuous Emission Monitoring System, CEMS 购买在 杭州 
0
购买 Continuous Emission Monitoring System, CEMS
Continuous Emission Monitoring System, CEMS

Continuous Emission Monitoring System, CEMS

预订, 20 天
请卖家确认价格
交货:
销售员
中国, 杭州 
(地图指示)
+86( 
显示电话
描述

Continuous Emission Monitoring System, CEMS

 

CEMS has four basic parts: the dust monitoring subsystem, gaseous pollutants monitoring subsystem, flue gas parameter monitoring subsystem, system control and data acquisition and processing subsystem. It can monitor SO2, NOx, O2, dust, temperature, pressure, flow rate and other parameters such as HCl, HF, CO, CO2 for specific occasions. After dedusting by sampling probe, sampling by heating pipe, dehydration and cooling by two-step condensing, the measured gas is analyzed by the heated gas analysis module (TDLAS and DOAS technique).It  is an effective solution to solve the technical problem that great humidity variation of the waste incineration and other occasions lead to  measuring data fluctuation.

Zetian CEMS can be divided into hot wet method and condensation method based on different treatment on the water in flue gas during pretreatment process.

Hot wet method: measurement is proceeding under high temperature (120-140℃) heat tracing for whole process and effectively prevent water from liquefying that affect measurement and pollution of gas cell.Condensation: use pre-cooling and condenser to separate gas and water rapidly; directly measure dry base value of gaseous pollutants.

Features

 

All the indexes are measured in the condition of high temperature   

To avoid condensation water absorbing SO2 which may lead to low measurement results, and corrosion of pre-treatment pipeline .

System has simple structure, high integration

Under the effect of drainage pump, the flue gas passes through probe, heat tracing pipeline; directly 

goes into the gas chamber; SO2 and NOx concentrations are being measured; the flue gas enters the 

zirconia/humidity/drainage pump module, and then discharges directly.

 

System has simple structure, high integration and easy to maintain. 

 

Achieve the simultaneous measurement for NO and NO2

 

Carry out simultaneous measurement for NO and NO2, and then obtain NOx by the accumulation 

method. No need of NO2→NO converter.

 

Self-researched and developed core devices and algorithms 

 

Core devices are self-researched and developed, including the light source, spectrometer, gas chamber, 

humidity module, dust meter, etc.

 DOAS algorithm is self-researched; the system has strong market competitiveness.

Applications

 

This product can be widely applied in the following:

  • Flue gas continuous emission monitoring ( CEMS ) for the power plants (analyze SO2, NO, NO2 and O2 ) 
  • DeSOx process monitoring (analyze SO2 and O2)
  • DeNOx process monitoring (analyze NO, NO2, NH3 and O2)
  • Waste incineration flue gas continuous emission monitoring (analyze SO2, NO, NO2 and O2)
  • Trace Cl2 analysis of the PVC process and titanium dioxide production process for chlor-alkali plants (analyze Cl2)
  • Sulfur recovery process gas analysis (analyze SO2 and H2S)
  • Natural gas purification process gas analysis (analyze trace H2S)
  • Methyl iodide analysis for the coal chemical industry (analyze CH3I)
  • On-line air monitoring (analyze SO2, NO2 and O3), etc.
联系卖家
Continuous Emission Monitoring System, CEMS
Continuous Emission Monitoring System, CEMS
运输方式
比较0
清除Selected items: 0