TYL 3000 L/H fuel oil purification system water separator machine
- 64996.2 CNY/pcs - from 2 pcs
- Courier
- In detail
- BrandAssen
- Country of manufactureChina
- Coloras you need
- GTINChongqing
- sky zhousales manager 520
Application
The coalescing Separator oil filtration plant combines precision filtration and dehydration function. It can effectively remove emulsified water, free water and impurities in the oil.
The coalescing Separator oil filtration composed of three stages filter systme, including a coarse filter system, a secondary filter system, a fine filter system and a coalescing separation chamber, an oil pump and a circuit control system.
It is workable for the treatment of aviation fuel, gasoline, kerosene, diesel and other light oils, removing moisture and impurities and extend the life of nozzle, and improve the efficiency of the fuel engine. It is an ideal equipment for oil depots and oil storage stations.
Features
1.The filter does not need heat, which improves the dehydration efficiency 20 times than other forms of oil filter. the additives in the oil will not crack or deteriorate.
2.Due to the simple operation and automatic running of online water release, the machine can operate without guard.
3.The cost is 20 - 40% lower than vacuum oil filter, centrifuge, and ordinary oil filter.
4.Automatic alarm for errors. It will automatically alarm and prompt the operation methods when the operation is abnormal and needs maintenance.
5.Automatic shutdown in case of crisis during operation to protect the device
6.The operation screen can display system status, including current and historical operation data.
Filtration principle
Large particles enter the 150 micron suction filter in front of the pump to protect the oil pump and then enter the PALLI high efficiency pre - filter. KP( 3μm), KN (6 μm), KS(12 μm) filter element can be selected as required.
Coalescence principle
When the oil pass through the equipment, it enters the coalescing filter element. The free water and emulsified water in the oil are coalesced into larger water droplets after passing through the filter element and sink into the water storage tank under the action of gravity.
Separation principle
The oil after passing through the coalescing filter element will enter the separation filter element located above. the separation filter element is made of special hydrophobic material. When the oil passes through, the small size water droplets are blocked, the oil enters the filter element and discharges from liquid outlet. ( the blocked water droplets gather with each other, gradually increase in size, and then settle into the water storage tank under the container due to gravity)
Drainage principle
The separated water is stored in the water storage tank, and the oil - water interface can be measured by the interface meter. When the interface height reaches the set upper limit value, the solenoid valve at the lower part of the water storage tank will open, and the water will pass through the drain discharge.
Technical Parameters
Model |
TYL - 30 |
TYL - 50 |
TYL - 100 |
TYL - 150 |
TYL - 200 |
TYL - 400 |
Rated flow(L/min) |
30L/min |
50L/min |
100L/min |
150L/min |
200L/min |
400L/min |
Temperature |
25 - 80℃ |
|||||
Recommended viscosity |
10 - 120Cst |
|||||
Rated pressure |
0.6MPa |
|||||
The original pressure loss |
0.01MPa |
|||||
First class filtration accuracy |
100um |
|||||
Secondary precision filtration accuracy |
10, 20, 40um |
|||||
Third precision filtration accuracy |
3, 5, 10, 20um |
|||||
Voltage(V) |
Three - phase AC380V(or as your needs) |
|||||
Motor Power |
0.75KW |
1.1KW |
2.2KW |
4KW |
5.5KW |
13KW |
Weight |
150KG |
200KG |
300KG |
520KG |
860KG |
2860KG |
Sizes(CM) |
120x82x125 |
135x82x140 |
174x98x145 |
180x100x154 |
184x105x178 |
318x160x20 |