PHFZ Series Pleated Filter Cartridge
Code: 842190
In stock
Price:
452 CNY
Wholesale:
- 436 CNY/pcs - from 300 pcs
- Courier
- In detail
Products of other enterprises
Technical characteristics
- BrandPullner
- Country of manufactureChina
- ColorPP material
- Inlet water quality
Description
PHFZ Series washable pleated filter cartridge is currently the most widely used Condensate Polishing pre - filter cartridge in domestic. It’s made of pleated high - precision polypropylene filter membrane, all welded using hot - melt, without any additives, adhesives and surfactants, which ensure high accuracy, high - throughput, high - strength, low extractables and low initial pressure. It can be divided into PHFZ - Ⅰ(7 parts), PHFZ - Ⅱ(2 parts) and PHFZ - Ⅲ (4 parts) three types. The PHFZ - Ⅱ (2 parts) is welded of 40 " and 30 ", is the only one filter with 69mm diameter and integral outer support in domestic.
Complete polypropylene structure and extensive application of chemical;
Using the threaded connection, easy installation, high dirt holding capacity;
Simple system, no acid consumption and pollution of regeneration acid and alkali;
Different precision can be used as startup and operation filter element of condensate polishing;
Desalination, iron of petrochemical water treatment
RO pre - filtration, desalination pretreatment;
Center Core: Reinforced Polypropylene
Dimensions(nominal)
Outside Diameter: 69mm, 65mm(PHFZ - Ⅲ (4 parts))
Length: 70"
Connection Type: Thread
Connection size: 1 1/2" - 12(Internal thread ), M33×1.5(external thread), (Customized as customers’ request)
Bottom Thread: 3/8, M6, M8, M10
Filter area: 6.5㎡
Maximum Operating Temperature: 85℃
Maximum Operating Differential Pressure: 3.0bar, 60℃
Maximum Operating Differential Pressure(reverse direction): 2.1 bar,21 ℃
Design Flow Rate: 3.5m³/h~4.5m³h (Recommended 3.9m3/h)
Inlet water quality: Backwash water and gas: Under the pressure of 1.36 - 2.1 bar, each filter backwash water 0.45 - 0.65 m3 / h, Backwash gas 3.4 - 5 m3 / h, can achieve the desired effect.
600MW supercritical and ultra - supercritical 1000MW units, respectively recommended use 4μm,1μm 70 "filter element, when debugging startup recommend 10μm filter element.
Features And Benefits
Integral support, with big filter area, long life, high strength, dimensional stability, low risk of leakage, etc.Complete polypropylene structure and extensive application of chemical;
Using the threaded connection, easy installation, high dirt holding capacity;
Simple system, no acid consumption and pollution of regeneration acid and alkali;
Different precision can be used as startup and operation filter element of condensate polishing;
Applications
Power plant Condensate Polishing systemDesalination, iron of petrochemical water treatment
RO pre - filtration, desalination pretreatment;
Technical Specifications
Filter Media: PolypropyleneCenter Core: Reinforced Polypropylene
Dimensions(nominal)
Outside Diameter: 69mm, 65mm(PHFZ - Ⅲ (4 parts))
Length: 70"
Connection Type: Thread
Connection size: 1 1/2" - 12(Internal thread ), M33×1.5(external thread), (Customized as customers’ request)
Bottom Thread: 3/8, M6, M8, M10
Filter Perormance
Micron: 1 - 10μmFilter area: 6.5㎡
Maximum Operating Temperature: 85℃
Maximum Operating Differential Pressure: 3.0bar, 60℃
Maximum Operating Differential Pressure(reverse direction): 2.1 bar,21 ℃
Design Flow Rate: 3.5m³/h~4.5m³h (Recommended 3.9m3/h)
Inlet water quality: Backwash water and gas: Under the pressure of 1.36 - 2.1 bar, each filter backwash water 0.45 - 0.65 m3 / h, Backwash gas 3.4 - 5 m3 / h, can achieve the desired effect.
600MW supercritical and ultra - supercritical 1000MW units, respectively recommended use 4μm,1μm 70 "filter element, when debugging startup recommend 10μm filter element.
Contact the seller
PHFZ Series Pleated Filter Cartridge