Jinhong Plastic mold components Internal Latch Lock DKL-1

Installation and use instructions:

• 1. Install the inner bushing, fix the inner bushing on the fixed mould in direction vertical to the mould joint by using a hexagonal socket head cap screw, and accurately calculate the first mould opening stroke before installation;
• 2. Install the outer bushing, fix the outer bushing on the runner plate in direction vertical to the mould joint through a screw cap, and make the outer bushing concentric with the inner bushing;
• 3. Install the central insertion rod after installing the outer bushing and the inner bushing symmetrically on the mould and determining that they are correctly installed and run normally;
• 4. Conduct the fit function test to check whether the movement of all parts for the reset mechanism is smooth, and the stroke is consistent;
• 5. The internal latch locks are precision devices, which should be positioned in kind and installed symmetrically;
• 6. It is recommended that 4 internal latch locks should be used for each mould;
• 7. There are three diameters: 28MM, 34MM and 45MM. Select according to the mould size. There are two stroke ranges and central rod lengths respectively for three models;
• 8. If the mould is required to be repaired, remove the internal latch locks and then conduct the subsequent operation;
• More information：