Less than 1 year old on Allbiz
- Country of manufactureRussia
Flashing beacon MP S 12 - 55 red
Flashing beacons are effectively used to mark special service vehicles and special equipment in traffic, as well as by road and construction services when performing work that requires marking.
- The hood is made of impact - resistant (unbreakable) transparent material - polycarbonate.
- The lighthouse has a H1 12 - 55 halogen lamp.
- The rotation of the reflector is provided by a gear train that can work reliably for 1000 hours without maintenance of the rubbing parts - the gear wheel.
- The lighthouse is fastened with three M6 bolts
- Works in conditions from - 40 to + 50 С
|Supply voltage||12 in|
|Flash frequency, flash groups||2 - 4 Hz|
|Characteristic||Lighthouse C Flashing|
|Light source||Halogen lamp AGK 12 - 55 (H1)|
|Connection to the vehicle's on - board network||Two wires 200 mm. Positive lead is red wire, negative lead is black wire.|
|Diffuser, cap color||Red|
|Fastening||Mechanical, three bolts M6|
|Dimensions (edit)||Height 208 mm, base diameter 180.5 mm|
|Distinctive features||Rotation of the reflector by means of a gear drive. The cap is made of impact - resistant material - polycarbonate.|
|Packing rate||10 pieces|
|Applicability||Designed to provide special light signals to a vehicle. Mounts on the roof of the car or on a pillar with a 360 * view.|
|Certificate||The lighthouse was tested at the Research and Experimental Institute of Automotive Electronics and Electrical Equipment in Moscow for compliance with the UNECE Regulations.|
|Degree of protection||IP55 in accordance with GOST14254 - 96|
Similar company products
Contact the seller
Flashing beacon mp s 12-55 red