100m HDMI Extender Over Single Cat5e/6, HDMI 1.4V, With 3D, IR, HEC

The HDT001 can turn the HDMI Signal, Ethernet signal and Remote Control Signal into HDBaseT signal and transmit it to the Ethernet cable by cat5e/6. (recommended to use CAT6). The receiver changes the received HDBaseT signal into each own original signal, expands multi Ethernet port that can support 100M bandwidth Ethernet signal, and guarantees the no loss transmission of the signal. The extender distance can reach up to 100 meter. It meets the need of the long distance of HDMI Signal.

Our devices offer solutions for noise, space and security concerns, data center control, information distribution, conference room presentation, school and corporate training environments.

FEATURES
1. Support 3D
2. Support HDCP
3. Video Input Support: 24/50/60fs/1080p/1080I/720p/576p/576I/480p/480I
4. Support 1080p@60Hz@48bit pixels
5. Through one cat5e or CAT6 to send the 10.2Gbps HDMI Signal and 100Mbps Ethernet signal, the distance can reach 100m.
6. There are four standard Ethernet port on the sender and receiver. While use one Ethernet signal to connect any of the four Ethernet port in sender and receiver Any of the four Ethernet port in sender and receiver, the other three Ethernet port can go connection with PC to surf.
7. Video Out Support: 24/50/60fs/1080p/1080I/720p/576p/576I/480p/480I
8. Support CEC
9. Support Audio Format: DTS-HD/Dolby-trueHD/LPCM7.1/DTS/Dolby-AC3/DSD
10. IR Extension Function, you can use the Signal source remote to control the source device at the receiver.
11. LED Status Light: When the power or extender is working, the related LED light will go bright.
12. Use standard HDMI Cable and Ethernet Cable,
13. No loss of Signal
14. Easy Operation and Installation
15. With 5V/2A Power Adaptor

CONNECTION AND OPERATION:
1. Use one HDMI cable to connect the signal source to the sender, the HDMI cable length can up to 10m.
2. Use one HDMI cable to connect the display end to the receiver, the HDMI Cable length can up to 15m.
3. Use one Ethernet signal to connect any of the four Ethernet port in sender and receiver, the other three Ethernet port can go connection with PC to surf.
4. Use one cat5e/6(recommend) to connect the sender out with the receiver in, the distance can up to 100m.
5. Connect the 5V power adaptor to the extender